Back___________________Next__________________Home
Buy Your Industrial Control Products Here!
Gemco Parts Description Page 9
| Part Number |
Product Category |
Description |
|---|---|---|
| 1989-CA-16-R-12-S-E-H-R | Brake Parts | Ametek Gemco Quik-Set III Multi Turn Programmable Limit Switch AME-1989-CA-16-R-12-S-E-H-R |
| 1989-CA-16-R-12-S-E-R | Brake Parts | Ametek Gemco Quik-Set III Multi Turn Programmable Limit Switch AME-1989-CA-16-R-12-S-E-R |
| 1989-CA-16-R12-S-E-H-RMO | Brake Parts | Ametek Gemco CPU Module for a 1989 Quik-Set III PLS Part AME-1989-CA-16-R12-S-E-H-RMO CA = CPU module Only, no Keypad 16 = 16 Output Circuits R = Resolver Input 12 = 12 Bit Resolution, 4,096 Positions S = Single Turn Resolver E = Current Sinking H = RS232 Transceiver R = Remote Serial Display RS422 Transmitter M = Multi-Program O = Remote Reset to Preset |
| 1989-CA-48-R-12-S-E-O | Brake Parts | Ametek Gemco Quik-Set II Multiturn PLS 1989-CA-48-R-12-S-E-O CA = CPU Module Only, no Keypad 48 = 48 Output Circuits R = Resolver Input 12 = 12 Bit resolution / 4,096 Positions S = Single Turn Resolver E = Program Output Current Sinking O = Remote Preset to Reset |
| 1989-KP | Brake Parts | Ametek Gemco Keypad Assembly for a 1989 Quik Set III 6/7 |
| 1989-O-115-A-E | Brake Parts | Ametek Gemco Output Module Assembly 115 = 115 Volt AC, 50 - 60 Hz A = Solid State Triac, 3 AMP., 280 Volt AC Maximum E = with Gemco Enclosure |
| 1989-O-115-A-R-S | Brake Parts | Ametek Gemco Output Module. 16 Circuit High Power Output Module with Power Supply & 6 Foot Cable (when ordered separately) 115 = 115 Volt AC 50 - 60 Hz A = Solid state Triac 3 AMP, 280 Volt AC Maximum R = Reset to Preset or Brake Monitor Input S = Standard Panel Mount |
| 1989-O-115-M-C-S | Brake Parts | Ametek Gemco Output Module for use with 1989 Quik-Set III Multiturn PLS 1989-O-115-M-C-S 16 Circuit High Power Output Module which includes the Power Supply and a 6 Foot Connection Cable 115 = 115 Volt AC, 50 - 60 Hz. Input M = Mechanical Relays, SPDT / Single Pole Double Throw, 10 AMP C = Fault Check Relay Option S = Standard Panel Mount |
| 1989-O-115-M-S | Brake Parts | Ametek Gemco Module. 16 Circuit High Power Output Module with Power Supply with 6 Foot Cable (when ordered separately) 115 = 115 Volt AC, 50 - 60 Hz M = Mechanical relay SPDT 10 AMP S = Standard Panel Mount No output module options |
| 1990DN-PLS8-X | Brake Parts | Ametek Gemco Interface. DeviceNet Resolver Interface Module. Plugs in as a Node on a Control System or DeviceNet Scanner Card. Continues rotary position data is provided with 23-Bit Resolution. Eight built in user programmable set points allow direct control of critical functions. All programming is done over the DeviceNet Network |
| 1992-E-R-X-X-X | Brake Parts | Ametek Gemco Press-Set Automation Controller. Press-Set System: Controller Output Module with Integral Cable Assembly 1992-E-R-X-X-X E = Current Sinking Digital Output Code Format R = Ram Adjust Software, hardware ordered separately X = Controller Only X = Controller Only, controller accepts 80 - 240 VAC 50/60 Hz, Output module must be specified with an input voltage X = Enclosure, None / Standard |
| 1992-E-X-16M-1-X | Brake Parts | Ametek Gemco Press-Set Automation Controller. Press-Set System: Controller Output Module with Integral Cable Assembly 1992-E-X-16M-1-X E = Current Sinking Digital Output Code Format X = Standard Software 16M = 16 Mechanical Relay S.P.D.T. 10 AMP, standard 1 = Input Voltage for the output module, 115 VAC 50/60 Hz. standard X = Enclosure, None / Standard |
| 1995 | Brake Parts | |
| 1995-1446 | Brake Parts | Ametek Gemco Display. Remote Circular Display for the 1992 Press-Set Controller |
| 1995-1512 | Brake Parts | Ametek Gemco Programmable Limit Switch. Micro-Set Series 1995 PLS Programmer with Brake Monitor & Lockout Security Software |
| 1995-A-6M-P-X | Brake Parts | Ametek Gemco Micro-Set Programmable Limit Switch. Standard Micro-set PLS-Resolver Input. 1995A-6M-P-X 1995A Micro-set PLS Programmer with Reset & Motion Detect 6M = Qty. 6, Mechanical Relay SPDT 10 AMP P = Special Software with MultiprogramSpeed Offset and Time Based Outputs to standard software features X - Open Chassis - No Enclosure |
| 1995-A-6M-X-12A | Brake Parts | Ametek Gemco Micro-Set Programmable Limit Switch. Standard Micro-set PLS-Resolver Input. 1995A-6M-X-12A 1995A + Micro-set PLS Programmer with Reset & Motion Detect. 6M = Qty. 6, Mechanical Relay SPDT 10 AMP X = Standard Software 12A = NEMA 12 Enclosure. (programmer only) |
| 1995-A-6M-X-12B-E6M | Brake Parts | Ametek Gemco Programmable Limit Switch model 1995-A-6M-X-12B-E6M Micro-Set Series 1995 PLS Programmer with Reset to Preset & Motion Detect A = Resolver Input only 6M = Qty. 6 Mechanical Output Relays SPDT @ 10 Amp X =Standard Software 12B = NEMA 12 Enclosure with room for 2 Expansion Modules E6M = Factory Mounted Expansion Module with 6 Mechanical Relays. SPDT @ 10 AMP |
| 1995-A-6M-X-X | Brake Parts | Ametek Gemco Micro Set Programmable Limit Switch model 1995-A-6M-X-X with Reset to Preset & Motion Detect A = Resolver Input Only 6M = 6 Mechanical Output Relays. Single Pole Double Throw, 10 AMP X = Standard Software X = Open Chassis - No Enclosure expansion modules ordered separately (6LBS) |
| 1995-B-6M-P-12A | Brake Parts | Ametek Gemco Programmable Limit Switch model 1995-B-6M-P-12A Micro-Set Series 1995 PLS Programmer with Reset to Preset & Motion Detect B = Resolver Input with Brake Monitor 6M = Qty. 6 Mechanical Output Relays SPDT @ 10 Amp P = Special Software adds multiprogram speed offset & time based outputs to standard software features 12A = NEMA 12- Programmer Only |
| 1995-B-6M-P-12B-E06M | Brake Parts | Ametek Gemco Programmable Limit Switch model 1995-B-6M-P-12B-E6M Micro-Set Series 1995 PLS Programmer with Reset to Preset & Motion Detect B = Resolver Input with Brake Monitor 6M = Qty. 6 Mechanical Output Relays SPDT @ 10 Amp P = Special Software adds multiprogram speed offset & time based outputs to standard software features 12B = NEMA 12 Enclosure with room for 2 Expansion Modules E6M = Factory Mounted Expansion Module with 6 Mechanical Relays. SPDT @ 10 AMP |
| 1995-B-6M-P-X | Brake Parts | Ametek Gemco Programmable Limit Switch model 1995-B-6M-P-X Micro-Set Series 1995 PLS Programmer with Reset to Preset & Motion Detect B = Resolver Input with Brake Monitor 6M = Qty. 6 Mechanical Output Relays SPDT @ 10 Amp P = Special Software adds multiprogram speed offset & time based outputs to standard software features X = Open Chassis - No Enclosure. expansion modules ordered separately (6LBS) |
| 1995-B-6M-X-X | Brake Parts | Ametek Gemco Micro-Set Programmable Limit Switch model 1995-B-6M-X-X with Reset to Preset & Motion Detect B = Resolver Input with Brake Monitor 6M = 6 Mechanical Relays, SPDT 10 AMP X = Standard Software X = Open Chassis - No Enclosure, expansion modules ordered separately (6LBS) |
| 1995-E-3A3D-6 | Brake Parts | Ametek Gemco Expansion Modules for the 1995 PLS. 3A3D = Output Relays, Qty 3 AC @ 1 AMP 70 - 250 Volt & Qty 3 DC @ 2 AMP 5 - 60 Volt 6 = 6 Foot Cable Length, Maximum Length 300 Feet Maximum of 4 Output Modules per PLS |
| 1995-E-6M-6 | Brake Parts | Ametek Gemco Output Expansion Module 1995-E-6M-6 with 6 Mechanical Relays, SPDT @ 10 AMP. Standard Cable 6 Foot long. Over 6 foot add $ 1.00 / foot and change last digit |
| 1995-L-6M-P-12A | Brake Parts | Ametek Gemco Micro Set Programmable Limit Switch model 1995-L-6M-P-12A with reset to Preset & Motion Detect L = Linear input Only 6M = Qty. 6, Mechanical Output Relays. Single Pole Double Throw, 10 AMP P = Special Software. Adds Multiprogram Speed Offset and Time Based Outputs to the Standard Software 12A = NEMA 12 Enclosure for the programmer only |
| 1995-L-6M-X-12A | Brake Parts | Ametek Gemco Micro Set Programmable Limit Switch model 1995-L-6M-X-12A with reset to Preset & Motion Detect L = Linear input Only 6M = Qty. 6, Mechanical Output Relays. Single Pole Double Throw, 10 AMP X = Standard Software 12A = NEMA 12 Enclosure for the programmer only |
| 1995-L-6M-X-X | Brake Parts | Ametek Gemco Micro Set Programmable Limit Switch model 1995-L-6M-X-X with Reset to Preset & Motion Detect L = Linear input Only 6M = Mechanical Output Relays. Single Pole Double Throw, 10 AMP X = Standard Software X = Open Chassis - No Enclosure (expansion modules ordered separately) |
| 19951446 | Brake Parts | Ametek Gemco Display. Series 1995 Rotary Remote Display. 3/4 Inch L.E.D. Digital Display that also has an L.E.D. Bars every 10 Degrees in a Circular pattern / display. Center Digital Display can indicate either Position or RPM. Ideal for mechanical stamping presses and shears. Display can be mounted up to 1000 feet from programmer |
| 1996C-RSA-12 | Brake Parts | Ametek Gemco Ram-Set Press Shut Height Control. Ram-Set Controller with Output Board, Standard Software and Binary Output. The Ram-Set allows you to automate the shut height adjustment process. Consistently Set Shut Height to + or - .002 Inches. Stores up to 500 Die Numbers and Shut Height Values. For use on single or double action presses RSA = RS485 Communcation 12 = NEMA 12 Rated Enclosure |
| 1996C-X-12 | Brake Parts | Ametek Gemco Ram-Set Press Shut Height Control. Ram-Set Controller with Output Board, Standard Software and Binary Output. The Ram-Set allows you to automate the shut height adjustment process. Consistently Set Shut Height to + or - .002 Inches. Stores up to 500 Die Numbers and Shut Height Values. For use on single or double action presses X = No RS485 Communication 12 = NEMA 12 Rated Enclosure |
| 1996C-X-X | Brake Parts | Ametek Gemco Ram-Set Press Shut Height Control. Ram-Set Controller with Output Board, Standard Software and Binary Output. X = no options or enclosure. The Ram-Set allows you to automate the shut height adjustment process. Consistently Set Shut Height to + or - .002 Inches. Stores up to 500 Die Numbers and Shut Height Values. For use on single or double action presses. |
| 1997-1447 | Brake Parts | Ametek Gemco Gate Hoist Cam Box. 4 Circuit. Right End Input Shaft |
| 1997-1448 | Brake Parts | Ametek Gemco Gate Hoist Cam Box. 4 Circuit. Left End Input Shaft |
| 1999-Re-Calibrate | Brake Parts | Ametek Gemco Re-Calibration |
| 1999-SEM | Brake Parts | Ametek Gemco Semelex II Safetimeter. Test Set for full and part revolution clutches. Includes Meter, Position / Velocity Transducer, Autohand and Accessories |
| 1999OPT5YRWRNTY | Brake Parts | Ametek Gemco Optional 5 Year Limited Warranty. Includes 4 Annual Re-Calibrations. Shipping costs are not included |
| 2000-100B | Brake Parts | Ametek Gemco Rotary Limit Switch Series 2000 Worm Gear Type with Bronze Gears & Steel Cams 1000 to 1 Ratio Gear Ratio, the cam block rotates once every 1000 turns of the main shaft 4 Independently Adjustable Switches/ Circuits / Cams Single Pole Double Throw U.L. Listed Precision Snap Action Switches which can be wired for normally open or closed circuits. 4 Screw Terminals Standard Cams allow switch contacts to be opened for 25 or 335 Degrees. Other cam dwells are available NEMA 12 Enclosure Turns required to reset switch 10 Maximum switch setting @ 920 Up to 1000 RPM Clock Wise or CCW 1/2 Inch Diameter Input Shaft Extends 1 & 1/2 Inch from the Enclosure, Includes a Woodruff Keyway & # 404 Key Maximum Operating Temperature 180 Degrees F 1/2 -14 American Standard Pipe Thread Entrance (6LBS) |
| 2000-101B | Brake Parts | Ametek Gemco Rotary Limit Switch. Series 2000 Worm Gear Type. Standard 4 Cam / Circuit / Switch with Single Pole Double Throw Snap Action Switches (S.P.D.T.) 5 to 1 Gear Ratio. Cast Aluminum NEMA Type 4 Watertight Enclosure. Up to 1000 RPM no minimum. Clock Wise or CCW Rotation. 1/2 Inch Diameter Input Shaft with a # 404 Woodruff Key & Keyway. 1/2 -14 American Standard Pipe Thread Electrical Entrance. Maximum operating temperature 180 degrees F. 2 LBS. 6 LBS Gross |
| 2000-102B | Brake Parts | Ametek Gemco Rotary Limit Switch. Series 2000 Worm Gear Type. Qty. 4, Independent Cams / Circuits / Switches with Single Pole Double Throw Snap Action Switches (S.P.D.T.) 10 to 1 Gear Ratio. Cast Aluminum NEMA 4 Rated Watertight Enclosure. Up to 1000 RPM no minimum. Clock Wise or CCW Rotation. 1/2 Inch Diameter Input Shaft with a # 404 Woodruff Key & Keyway. 1/2 -14 American Standard Pipe Thread Electrical Entrance. Maximum operating temperature 180 degrees F. (6LBS) |
| 2000-103B | Brake Parts | Ametek Gemco Rotary Limit Switch Series 2000 Worm Gear Type with Bronze Gears & Steel Cams 20 to 1 Ratio Gear Ratio, the cam block rotates once every 20 turns of the main shaft 4 Independently Adjustable Switches/ Circuits / Cams Single Pole Double Throw U.L. Listed Precision Snap Action Switches which can be wired for normally open or closed circuits. 4 Screw Terminals Standard Cams allow switch contacts to be opened for 25 or 335 Degrees. Other cam dwells are available NEMA 4 Rated Enclosure Turns required to reset switch 1/8th Maximum switch setting @ 19 & 1/4 turns Up to 1000 RPM Clock Wise or CCW 1/2 Inch Diameter Input Shaft Extends 1 & 1/2 Inch from the Enclosure, Includes a Woodruff Keyway & # 404 Key Maximum Operating Temperature 180 Degrees F 1/2 -14 American Standard Pipe Thread Entrance (6LBS) |
| 2000-104B | Brake Parts | Ametek Gemco Rotary Limit Switch. Series 2000 Worm Gear Type. Standard 4 Cam / Circuit / Switch with Single Pole Double Throw Snap Action Switches (S.P.D.T.) 30 to 1 Gear Ratio. Cast Aluminum NEMA Type 4 Watertight Enclosure. Up to 1000 RPM no minimum. Clock Wise or CCW Rotation. 1/2 Inch Diameter Input Shaft with a # 404 Woodruff Key & Keyway. 1/2 -14 American Standard Pipe Thread Electrical Entrance. Maximum operating temperature 180 degrees F. 2 LBS. 6 LBS Gross |
| 2000-105B | Brake Parts | Ametek Gemco Rotary Limit Switch Series 2000 Worm Gear Type with Bronze Gears & Steel Cams 40 to 1 Ratio Gear Ratio, the cam block rotates once every 40 turns of the main shaft 4 Independently Adjustable Switches/ Circuits / Cams Single Pole Double Throw U.L. Listed Precision Snap Action Switches which can be wired for normally open or closed circuits. 4 Screw Terminals Standard Cams allow switch contacts to be opened for 25 or 335 Degrees. Other cam dwells are available NEMA 4 Rated Enclosure Turns required to reset switch 1/2 Maximum switch setting @ 38 Turns Up to 1000 RPM Clock Wise or CCW 1/2 Inch Diameter Input Shaft Extends 1 & 1/2 Inch from the Enclosure, Includes a Woodruff Keyway & # 404 Key Maximum Operating Temperature 180 Degrees F 1/2 -14 American Standard Pipe Thread Entrance (6LBS) |
| 2000-106B | Brake Parts | Ametek Gemco Rotary Limit Switch. Series 2000 Worm Gear Type. Standard 4 Cam / Circuit / Switch with Single Pole Double Throw Snap Action Switches (S.P.D.T.) 50 to 1 Gear Ratio. Cast Aluminum NEMA Type 4 Watertight Enclosure. Up to 1000 RPM no minimum. Clock Wise or CCW Rotation. 1/2 Inch Diameter Input Shaft with a # 404 Woodruff Key & Keyway. 1/2 -14 American Standard Pipe Thread Electrical Entrance. Maximum operating temperature 180 degrees F. (6 LBS) |
| 2000-107B | Brake Parts | Ametek Gemco Rotary Limit Switch Series 2000 Worm Gear Type with Bronze Gears & Steel Cams 60 to 1 Ratio Gear Ratio, the cam block rotates once every 60 turns of the main shaft 4 Independently Adjustable Switches/ Circuits / Cams Single Pole Double Throw U.L. Listed Precision Snap Action Switches which can be wired for normally open or closed circuits. 4 Screw Terminals Standard Cams allow switch contacts to be opened for 25 or 335 Degrees. Other cam dwells are available NEMA 4 Rated Enclosure Turns required to reset switch 1/2 Maximum switch setting @ 57 & 1/2 Turns Up to 1000 RPM Clock Wise or CCW 1/2 Inch Diameter Input Shaft Extends 1 & 1/2 Inch from the Enclosure, Includes a Woodruff Keyway & # 404 Key Maximum Operating Temperature 180 Degrees F 1/2 -14 American Standard Pipe Thread Entrance (6LBS) |
| 2000-108B | Brake Parts | Ametek Gemco Rotary Limit Switch. Series 2000 Worm Gear Type. Standard 4 Cam / Circuit / Switch with Single Pole Double Throw Snap Action Switches (S.P.D.T.) 80 to 1 Gear Ratio. Cast Aluminum NEMA Type 4 Watertight Enclosure. Up to 1000 RPM no minimum. Clock Wise or CCW Rotation. 1/2 Inch Diameter Input Shaft with a # 404 Woodruff Key & Keyway. 1/2 -14 American Standard Pipe Thread Electrical Entrance. Maximum operating temperature 180 degrees F. 2 LBS. 6 LBS Gross |
| 2000-109B | Brake Parts | Ametek Gemco Rotary Limit Switch. Series 2000 Worm Gear Type. Standard 4 Cam / Circuit / Switch with Single Pole Double Throw Snap Action Switches (S.P.D.T.) 100 to 1 Gear Ratio. Cast Aluminum NEMA Type 4 Watertight Enclosure. Up to 1000 RPM no minimum. Clock Wise or CCW Rotation. 1/2 Inch Diameter Input Shaft with a # 404 Woodruff Key & Keyway. 1/2 -14 American Standard Pipe Thread Electrical Entrance. Maximum operating temperature 180 degrees F. 2 LBS. 6 LBS Gross |
| 2000-10B | Brake Parts | Ametek Gemco Rotary Limit Switch Series 2000 Worm Gear Type with Bronze Gears & Steel Cams 20 to 1 Ratio Gear Ratio, the cam block rotates once every 20 turns of the main shaft 2 Independently Adjustable Switches/ Circuits / Cams Single Pole Double Throw U.L. Listed Precision Snap Action Switches which can be wired for normally open or closed circuits. 4 Screw Terminals Standard Cams allow switch contacts to be opened for 25 or 335 Degrees. Other cam dwells are available NEMA 4 Rated Cast Aluminum Enclosure, Watertight Turns required to reset switch 1/8 Maximum switch setting @ 18 turns Up to 1000 RPM Clock Wise or CCW 1/2 Inch Diameter Input Shaft Extends 1 & 1/2 Inch from the Enclosure, Includes a Woodruff Keyway & # 404 Key Maximum Operating Temperature 180 Degrees F 1/2 -14 American Standard Pipe Thread Entrance (6LBS) |
| 2000-110B | Brake Parts | Ametek Gemco Rotary Limit Switch Series 2000 Worm Gear Type with Bronze Gears & Steel Cams 250 to 1 Ratio Gear Ratio, the cam block rotates once every 250 turns of the main shaft 4 Independently Adjustable Switches/ Circuits / Cams Single Pole Double Throw U.L. Listed Precision Snap Action Switches which can be wired for normally open or closed circuits. 4 Screw Terminals Standard Cams allow switch contacts to be opened for 25 or 335 Degrees. Other cam dwells are available NEMA 4 Rated Cast Aluminum Enclosure, Watertight Turns required to reset switch 2 Maximum switch setting @ 234 turns Up to 1000 RPM Clock Wise or CCW 1/2 Inch Diameter Input Shaft Extends 1 & 1/2 Inch from the Enclosure, Includes a Woodruff Keyway & # 404 Key Maximum Operating Temperature 180 Degrees F 1/2 -14 American Standard Pipe Thread Entrance (6LBS) |
| 2000-1112B | Brake Parts | Ametek Gemco Rotary Limit Switch. Series 2000 Worm Gear Type. Standard 4 Cam / Circuit / Switch with Single Pole Double Throw Snap Action Switches (S.P.D.T.) 500 to 1 Gear Ratio. Cast Aluminum NEMA Type 4 Watertight Enclosure. Up to 1000 RPM no minimum. Clock Wise or CCW Rotation. 1/2 Inch Diameter Input Shaft with a # 404 Woodruff Key & Keyway. 1/2 -14 American Standard Pipe Thread Electrical Entrance. Maximum operating temperature 180 degrees F. 2 LBS. 6 LBS Gross |
| 2000-1113B | Brake Parts | Ametek Gemco Rotary Limit Switch Series 2000 Worm Gear Type with Bronze Gears & Steel Cams 150 to 1 Ratio Gear Ratio, the cam block rotates once every 150 turns of the main shaft 4 Independently Adjustable Switches/ Circuits / Cams Single Pole Double Throw U.L. Listed Precision Snap Action Switches which can be wired for normally open or closed circuits. 4 Screw Terminals Standard Cams allow switch contacts to be opened for 25 or 335 Degrees. Other cam dwells are available NEMA 4 Rated Cast Aluminum Enclosure, Watertight Turns required to reset switch 4 Maximum switch setting @ 135 turns Up to 1000 RPM Clock Wise or CCW 1/2 Inch Diameter Input Shaft Extends 1 & 1/2 Inch from the Enclosure, Includes a Woodruff Keyway & # 404 Key Maximum Operating Temperature 180 Degrees F 1/2 -14 American Standard Pipe Thread Entrance (6LBS) |
| 2000-1116B | Brake Parts | Ametek Gemco Rotary Limit Switch Series 2000 Worm Gear Type with Bronze Gears & Steel Cams 300 to 1 Ratio Gear Ratio, the cam block rotates once every 300 turns of the main shaft 4 Independently Adjustable Switches/ Circuits / Cams Single Pole Double Throw U.L. Listed Precision Snap Action Switches which can be wired for normally open or closed circuits. 4 Screw Terminals Standard Cams allow switch contacts to be opened for 25 or 335 Degrees. Other cam dwells are available NEMA 4 Rated Cast Aluminum Enclosure, Watertight Turns required to reset switch 6 & 1/2 Maximum switch setting @ 265 turns Up to 1000 RPM Clock Wise or CCW 1/2 Inch Diameter Input Shaft Extends 1 & 1/2 Inch from the Enclosure, Includes a Woodruff Keyway & # 404 Key Maximum Operating Temperature 180 Degrees F 1/2 -14 American Standard Pipe Thread Entrance (6LBS) |
| 2000-1117B | Brake Parts | Ametek Gemco Rotary Limit Switch, Worm Gear Type, 300 to 1 Ratio, 4 Cam, Single Pole Double Throw Switches, NEMA 7 Enclosure, Maximum Speed 1000 RPM Clock Wise or CCW., 1/2 Inch Diameter Input Shaft, includes # 404 Woodruff Keyway, 1/2 -14 American Standard Pipe Thread Entrance. 2 LBS. |
| 2000-1118B | Brake Parts | Ametek Gemco Rotary Limit Switch Series 2000 Worm Gear Type with Bronze Gears & Steel Cams 600 to 1 Ratio Gear Ratio, the cam block rotates once every 600 turns of the main shaft 4 Independently Adjustable Switches/ Circuits / Cams Single Pole Double Throw U.L. Listed Precision Snap Action Switches which can be wired for normally open or closed circuits. 4 Screw Terminals Standard Cams allow switch contacts to be opened for 25 or 335 Degrees. Other cam dwells are available NEMA 12 Enclosure Turns required to reset switch 16 Maximum switch setting @ 555 Up to 1000 RPM Clock Wise or CCW 1/2 Inch Diameter Input Shaft Extends 1 & 1/2 Inch from the Enclosure, Includes a Woodruff Keyway & # 404 Key Maximum Operating Temperature 180 Degrees F 1/2 -14 American Standard Pipe Thread Entrance (6LBS) |
| 2000-1119B | Brake Parts | Ametek Gemco Rotary Limit Switch. Series 2000 Worm Gear Type. Standard 4 Cam / Circuit / Switch with Single Pole Double Throw Snap Action Switches (S.P.D.T.) 600 to 1 Gear Ratio. Cast Aluminum NEMA Type 4 Watertight Enclosure. Up to 1000 RPM no minimum. Clock Wise or CCW Rotation. 1/2 Inch Diameter Input Shaft with a # 404 Woodruff Key & Keyway. 1/2 -14 American Standard Pipe Thread Electrical Entrance. Maximum operating temperature 180 degrees F. (6LBS) |
| 2000-111B | Brake Parts | Ametek Gemco Rotary Limit Switch. Series 2000 Worm Gear Type. Standard 4 Cam / Circuit / Switch with Single Pole Double Throw Snap Action Switches (S.P.D.T.) 500 to 1 Gear Ratio. Cast Aluminum NEMA Type 4 Watertight Enclosure. Up to 1000 RPM no minimum. Clock Wise or CCW Rotation. 1/2 Inch Diameter Input Shaft with a # 404 Woodruff Key & Keyway. 1/2 -14 American Standard Pipe Thread Electrical Entrance. Maximum operating temperature 180 degrees F. 2 LBS. 6 LBS Gross |
| 2000-1122B | Brake Parts | Ametek Gemco Rotary Limit Switch Series 2000 Worm Gear Type with Bronze Gears & Steel Cams 2000 to 1 Ratio Gear Ratio, the cam block rotates once every 2000 turns of the main shaft 4 Independently Adjustable Switches/ Circuits / Cams Single Pole Double Throw U.L. Listed Precision Snap Action Switches which can be wired for normally open or closed circuits. 4 Screw Terminals Standard Cams allow switch contacts to be opened for 25 or 335 Degrees. Other cam dwells are available NEMA 4 Rated, Cast Aluminum, Red Finish Enclosure, Watertight Up to 1000 RPM Clock Wise or CCW 1/2 Inch Diameter Input Shaft Extends 1 & 1/2 Inch from the Enclosure, Includes a Woodruff Keyway & # 404 Key Maximum Operating Temperature 180 Degrees F 1/2 -14 American Standard Pipe Thread Entrance (6LBS) |
| 2000-1125B | Brake Parts | Ametek Gemco Rotary Limit Switch. Series 2000 Worm Gear Type. Standard 4 Cam / Circuit / Switch with Single Pole Double Throw Snap Action Switches (S.P.D.T.) 4000 to 1 Gear Ratio. Cast Aluminum NEMA Type 4 Watertight Enclosure. Up to 2000 RPM no minimum. Clock Wise or CCW Rotation. 1/2 Inch Diameter Input Shaft with a # 404 Woodruff Key & Keyway. 1/2 -14 Ametek Gemco Rotary Limit Switch Series 2000 Worm Gear Type with Bronze Gears & Steel Cams 4000 to 1 Ratio Gear Ratio, the cam block rotates once every 4000 turns of the main shaft 4 Independently Adjustable Switches/ Circuits / Cams Single Pole Double Throw U.L. Listed Precision Snap Action Switches which can be wired for normally open or closed circuits. 4 Screw Terminals Standard Cams allow switch contacts to be opened for 25 or 335 Degrees. Other cam dwells are available NEMA 4 Rated, Cast Aluminum, Red Finish Enclosure, Watertight Up to 1000 RPM Clock Wise or CCW 1/2 Inch Diameter Input Shaft Extends 1 & 1/2 Inch from the Enclosure, Includes a Woodruff Keyway & # 404 Key Maximum Operating Temperature 180 Degrees F 1/2 -14 American Standard Pipe Thread Entrance (6LBS) |
| 2000-1128B | Brake Parts | Ametek Gemco Rotary Limit Switch. Series 2000 Worm Gear Type. Standard 4 Cam / Circuit / Switch with Single Pole Double Throw Snap Action Switches (S.P.D.T.) 4000 to 1 Gear Ratio. Cast Aluminum NEMA Type 4 Watertight Enclosure. Up to 2000 RPM no minimum. Clock Wise or CCW Rotation. 1/2 Inch Diameter Input Shaft with a # 404 Woodruff Key & Keyway. 1/2 -14 Ametek Gemco Rotary Limit Switch Series 2000 Worm Gear Type with Bronze Gears & Steel Cams 5333.3 to 1 Ratio Gear Ratio, the cam block rotates once every 5333.3 turns of the main shaft 4 Independently Adjustable Switches/ Circuits / Cams Single Pole Double Throw U.L. Listed Precision Snap Action Switches which can be wired for normally open or closed circuits. 4 Screw Terminals Standard Cams allow switch contacts to be opened for 25 or 335 Degrees. Other cam dwells are available NEMA 4 Rated, Cast Aluminum, Red Finish Enclosure, Watertight Up to 1000 RPM Clock Wise or CCW 1/2 Inch Diameter Input Shaft Extends 1 & 1/2 Inch from the Enclosure, Includes a Woodruff Keyway & # 404 Key Maximum Operating Temperature 180 Degrees F 1/2 -14 American Standard Pipe Thread Entrance (6LBS) |
| 2000-112B | Brake Parts | Ametek Gemco Rotary Limit Switch. Series 2000 Worm Gear Type. Standard 4 Cam / Circuit / Switch with Single Pole Double Throw Snap Action Switches (S.P.D.T.) 1000 to 1 Gear Ratio. Cast Aluminum NEMA Type 4 Watertight Enclosure. Up to 1000 RPM no minimum. Clock Wise or CCW Rotation. 1/2 Inch Diameter Input Shaft with a # 404 Woodruff Key & Keyway. 1/2 -14 American Standard Pipe Thread Electrical Entrance. Maximum operating temperature 180 degrees F. (6LBS) |
| 2000-1130B | Brake Parts | Ametek Gemco Rotary Limit Switch Series 2000 Worm Gear Type with Bronze Gears & Steel Cams 150 to 1 Ratio Gear Ratio, the cam block rotates once every 150 turns of the main shaft 2 Independently Adjustable Switches/ Circuits / Cams Double Pole Double Throw U.L. Listed Precision Snap Action Switches which can be wired for normally open or closed circuits. 8 Screw Terminals per switch Standard Cams allow switch contacts to be opened for 25 or 335 Degrees. Other cam dwells are available NEMA 1 & 12 Enclosure Turns required to reset switch 4 Maximum switch setting @ 135 turns Up to 1000 RPM Clock Wise or CCW 1/2 Inch Diameter Input Shaft Extends 1 & 1/2 Inch from the Enclosure, Includes a Woodruff Keyway & # 404 Key Maximum Operating Temperature 180 Degrees F 1/2 -14 American Standard Pipe Thread Entrance (4LBS) |
| 2000-1131B | Brake Parts | Ametek Gemco Rotary Limit Switch Series 2000 Worm Gear Type with Bronze Gears & Steel Cams 150 to 1 Ratio Gear Ratio, the cam block rotates once every 150 turns of the main shaft 2 Independently Adjustable Switches/ Circuits / Cams Double Pole Double Throw U.L. Listed Precision Snap Action Switches which can be wired for normally open or closed circuits. 8 Screw Terminals per switch Standard Cams allow switch contacts to be opened for 25 or 335 Degrees. Other cam dwells are available NEMA 4 Rated Enclosure, Watertight Turns required to reset switch 4 Maximum switch setting @ 135 turns Up to 1000 RPM Clock Wise or CCW 1/2 Inch Diameter Input Shaft Extends 1 & 1/2 Inch from the Enclosure, Includes a Woodruff Keyway & # 404 Key Maximum Operating Temperature 180 Degrees F 1/2 -14 American Standard Pipe Thread Entrance (6LBS) |
| 2000-1132B | Brake Parts | Ametek Gemco Rotary Limit Switch. Worm Gear Type, Two Independent Circuits / Switches / Cams. 150 to 1 Gear Ratio. UL Listed D.P.D.T. Precision Snap Action Switches. NEMA 7 & 9 Rated Die Cast Aluminum Enclosure for Hazardous Locations, designed to meet the NEC Code for Class 1, Group D, and Class 2, Groups E, F & G Locations. Maximum Speed 1000 RPM. Maximum setting at 135 Input shaft Turns. 4 Turns to Reset (6LBS) |
| 2000-1133B | Brake Parts | Ametek Gemco Rotary Limit Switch Series 2000 Worm Gear Type with Bronze Gears & Steel Cams 300 to 1 Ratio Gear Ratio, the cam block rotates once every 300 turns of the main shaft 2 Independently Adjustable Switches/ Circuits / Cams Double Pole Double Throw U.L. Listed Precision Snap Action Switches which can be wired for normally open or closed circuits. 8 Screw Terminals per switch Standard Cams allow switch contacts to be opened for 25 or 335 Degrees. Other cam dwells are available NEMA 1 & 12 Enclosure Turns required to reset switch 6 & 1/2 Maximum switch setting @ 265 turns Up to 1000 RPM Clock Wise or CCW 1/2 Inch Diameter Input Shaft Extends 1 & 1/2 Inch from the Enclosure, Includes a Woodruff Keyway & # 404 Key Maximum Operating Temperature 180 Degrees F 1/2 -14 American Standard Pipe Thread Entrance (4LBS) |
Fenton, MO 63026
Phone: (636) 537-0202
E:mail: [email protected]