| Part Number: |
Description: |
| AUX HEATSINK (9861) |
7" Auxiliary Heatsink, for "L" bracket and KBMD Controls |
| AUX HEATSINK (9861) |
7" Auxiliary Heatsink, for "L" bracket and KBMD Controls |
| AUX HEATSINK LARGE (9829) |
9" Auxiliary Heatsink |
| CHOKE, 3 PHASE MOTOR (9992) |
Choke, 3 wire (Installs between Control and AC Motor) |
| CHOKE, LINE-ARM (9993) |
Choke, 2 wire, AC Line or DC Motor |
| COMB FUSE KIT (9849) |
For Motor Armature & AC Line (Fuses not included) |
| COMB FUSE KIT (9849) |
For Motor Armature & AC Line (Fuses not included) |
| DB RESISTOR 30 WATT (9864) |
Dynamic Braking Resistor, 10 Ohm, 30 Watt |
| DB RESISTOR 70 WATT (9865) |
Dynamic Braking Resistor, 10 Ohm, 70 Watt |
| DBVF (9598) |
KBVF, Dynamic Braking Module for single phase input models |
| DIN RAIL KIT (9995) |
DIN Rail Mounting Kit for "L" Bracket Controls |
| FUSE-1+14AKIT (9874) |
FUSE KIT, 1.25A (100 PC) |
| FUSE-1+14AMPS (9739) |
ARMATURE FUSE, 1.25A |
| FUSE-10AKIT (9881) |
FUSE KIT, 15A (100 PC) |
| FUSE-12-AKIT (9880) |
FUSE KIT, 12A (100 PC) |
| FUSE-12AMPS (9736) |
ARMATURE FUSE, .5A |
| FUSE-12-AMPS (9745) |
ARM OR LINE FUSE, 12A |
| FUSE-14AKIT (9871) |
FUSE KIT, .5A (100 PC) |
| FUSE-15AMPS (9746) |
ARM OR LINE FUSE, 15A |
| FUSE-1AKIT (9873) |
FUSE KIT, 1A (100 PC) |
| FUSE-1AMPS (9738) |
ARMATURE FUSE, 1A |
| FUSE-2+12AKIT (9876) |
FUSE KIT, 2.5A (100 PC) |
| FUSE-2+12AMPS (9741) |
ARMATURE FUSE, 2.5A |
| FUSE-20AKIT (9953) |
FUSE KIT, 20A (100 PC) |
| FUSE-20AMPS (9954) |
ARM OR LINE FUSE, 20A |
| FUSE-25AKIT (9882) |
FUSE KIT, 25A (100 PC) |
| FUSE-25AMPS (9747) |
ARM OR LINE FUSE, 25A |
| FUSE-2AKIT (9875) |
FUSE KIT, 2A (100 PC) |
| FUSE-2AMPS (9740) |
ARMATURE FUSE, 2A |
| FUSE-34AKIT (9872) |
FUSE KIT, .75A (100 PC) |
| FUSE-34AMPS (9737) |
ARMATURE FUSE, .75A |
| FUSE-4AKIT (9877) |
FUSE KIT, 4A (100 PC) |
| FUSE-4AMPS (9742) |
ARMATURE FUSE, 4A |
| FUSE-5AKIT (9878) |
FUSE KIT, 5A (100 PC) |
| FUSE-5AMPS (9743) |
ARMATURE FUSE, 5A |
| FUSE-8AKIT (9879) |
FUSE KIT, 8A (100 PC) |
| FUSE-8AMPS (9744) |
ARMATURE FUSE, 8A |
| KBAC AUTO/MAN SWITCH (9481) |
KBAC Auto/Manual Switch Kit |
| KBAC DIAC (9517) |
KBAC, Digital Interface Module, ModBus, RS-485 |
| KBAC FITTINGS (9526) |
KBAC Liquid Tight Fittings, 2 x 0.5", 1 x .75" |
| KBAC FSR SWITCH (9480) |
KBAC Forward/Stop/Reverse Switch Kit |
| KBAC RFAC-24D (9507) |
KBAC CE AC Line Filter (Class A) (Installs inside -24D) |
| KBAC RFAC-27D (9512) |
KBAC-27D CE AC Line Filter (Class A) (Installs inside -27D) |
| KBAC RFAC-27DNS (9513) |
KBAC-27D CE AC Line Filter (Class A) (Installs inside -27D w/o switch) |
| KBAC RFAC-3PNS (9515) |
KBAC CE 3 phase AC Line Filter (Class A) (For use with no switch) |
| KBAC RFAC-3PS (9479) |
KBAC CE 3 phase AC Line Filter (Class A) (For use with switch) |
| KBAC RSJ SWITCH (9340) |
KBAC Run/Stop/Jog Switch Kit |
| KBAC SIAC-24D (9488) |
KBAC Bi-Polar Signal Isolator (Installs inside -24D) |
| KBAC SIAC-27D (9467) |
KBAC Bi-Polar Signal Isolator (Installs inside -27D) |
| KBAC SIAC-2G (9488) |
KBAC Bi-Polar Signal Isolator (Installs inside -24D) |
| KBAC SIAC-2G (9600) |
KBAC Signal Isolator 2nd Generation (Installs inside all KBAC controls) |
| KBAC-24D Black (9987) |
NEMA 4X AC Inverter, 115/230 VAC 1p Input, thru 1.0 HP, 230 VAC 3p Output |
| KBAC-24D ON/OFF SWITCH (9482) |
KBAC-24D Power On/Off Switch Kit |
| KBAC-24D White (9988) |
NEMA 4X AC Inverter, 115/230 VAC 1p Input, thru 1.0 HP, 230 VAC 3p Output |
| KBAC-27D Black (9520) |
NEMA 4X AC Inverter, 115/230 VAC 1p Input, thru 1.5/2.0 HP, 230 VAC 3p Output |
| KBAC-27D ON/OFF SWITCH (9523) |
KBPC-225 On/Off AC Line Switch |
| KBAC-27D White (9521) |
NEMA 4X AC Inverter, 115/230 VAC 1p Input, thru 1.5/2.0 HP, 230 VAC 3p Output |
| KBAC-29 Black (9528) |
NEMA 4X AC Inverter, 230 VAC 3p Input, thru 3.0 HP, 230 VAC 3p Output |
| KBAC-29 White (9529) |
NEMA 4X AC Inverter, 230 VAC 3p Input, thru 3.0 HP, 230 VAC 3p Output |
| KBAC-3P ON/OFF SWITCH (9532) |
KBAC 3 Phase Power On/Off Switch Kit |
| KBAC-45 Black (9530) |
NEMA 4X AC Inverter, 460 VAC 3p Input, thru 3.0 HP, 460 VAC 3p Output |
| KBAC-45 White (9531) |
NEMA 4X AC Inverter, 460 VAC 3p Input, thru 3.0 HP, 460 VAC 3p Output |
| KBAC-48 Black (9540) |
NEMA 4X AC Inverter, 460 VAC 3p Input, thru 5.0 HP, 460 VAC 3p Output |
| KBAC-48 White (9541) |
NEMA 4X AC Inverter, 460 VAC 3p Input, thru 5.0 HP, 460 VAC 3p Output |
| KBAP-240D (9106) |
Overload Protector Board |
| KBBC-24M (9500) |
Battery DC to DC Chassis, 12/24 VDC, thru 40 Amps Continuous |
| KBBC-44M (9501) |
Battery DC to DC Chassis, 36/48 VDC, thru 40 Amps Continuous |
| KBCC-125 (9936) |
SCR Chassis Non-Reversing, 115 VAC, thru 1.5 HP, 90 VDC ARM |
| KBCC-125R (9937) |
SCR Chassis Relay Reversing, 115 VAC, thru 1.5 HP, 90 VDC ARM |
| KBCC-225 (9938) |
SCR Chassis Non-Reversing, 230 VAC, thru 3 HP, 180 VDC ARM |
| KBCC-225R (9924) |
SCR Chassis Relay Reversing, 230 VAC, thru 3 HP, 180 VDC ARM |
| KBCC-240D (9947) |
SCR Chassis Non-Reversing, KBPC circuit, 115/230 VAC, thru 1.0/2.0 HP, 90/180 VDC ARM |
| KBCC-255 (9940) |
SCR Chassis Non-Reversing, 230 VAC, 5 HP, 180 VDC ARM |
| KBEP-240D (9108) |
Electronic Potentiometer Board |
| KBET-240D (9469) |
Electronic Tachometer Board |
| KBIC BT KIT (9863) |
KBIC Barrier Terminal Kit |
| KBIC BTB (9884) |
KBIC Barrier Terminal Board |
| KBIC SI-5 (9443) |
KBIC Signal Isolator Board (SI-5) |
| KBIC-120 (9429) |
SCR Chassis Speed, 115 VAC, thru 0.5 HP, 1 HP with heatsink, 90 VDC ARM |
| KBIC-125 (9433) |
SCR Chassis Speed, 115 VAC, thru 0.75 HP, 1.5 HP with heatsink, 90 VDC ARM |
| KBIC-225 (9432) |
SCR Chassis Speed, 230 VAC, thru 1.5 HP, 3 HP with heatsink, 180 VDC ARM |
| KBIC-240 (9428) |
SCR Chassis Speed, 230 VAC, thru 1 HP, 2 HP with heatsink, 180 VDC ARM |
| KBIC-240D (9464) |
SCR Chassis Speed, 115/230 VAC, thru 0.5/1 HP, 1.0/2.0 HP with heatsink, 90/180 VDC ARM |
| KBIC-240DS (9423) |
SCR Chassis Speed, 115/230 VAC, thru 0.5 HP, 1 HP with heatsink, 90 VDC ARM |
| KBLC-120 (9109) |
|
| KBLC-225D (4147) |
DRIVE, 16A, 115/230 AC, 90/180 DC |
| KBLC-240 (9110) |
|
| KBLC-240D (9112) |
|
| KBLC-240DS (9116) |
|
| KBLF-13 (9557) |
|
| KBLF-14 (9577) |
|
| KBLF-23 (9558) |
|
| KBLF-23D (9559) |
|
| KBLF-24 (9578) |
|
| KBLF-24D (9579) |
|
| KBMD FBR SWITCH (9860) |
KBMD Forward/Brake/Reverse Mechanical Switch |
| KBMD-240D (9370) |
SCR NEMA 1 Reversing Optional, 115/230 VAC, thru 0.75/1.5 HP, 1.0/2.0 HP with heatsink, 90/180 VDC ARM |
| KBMG FS COVER (8839) |
KBMG Finger Safe Cover |
| KBMG MSB (8833) |
KBMG Multi-Speed Board |
| KBMG SIMG (8832) |
KBMG Signal Isolator Board, plugs on top of KBMG |
| KBMG SIMG FS COVER (8838) |
KBMG SIMG Finger Safe Cover |
| KBMG-212D (8831) |
SCR Chassis Regen Reversing, 115/230 VAC, thru 0.75/2.5 HP, 1.0/2.0 HP with heatsink, 90/180 VDC ARM |
| KBMG-212D W/SIMG (8835) |
|
| KBMG-21D (8830) |
SCR Chassis Regen Reversing, 115/230 VAC, thru 1/6 HP, 90/180 VDC ARM |
| KBMM BT KIT (9883) |
KBMM Barrier Terminal Kit |
| KBMM BTB (9897) |
KBMM Barrier Terminal Board |
| KBMM FSC (9564) |
KBMM Finger Safe Cover |
| KBMM RBM BTB (9952) |
KBMM Run Brake Module (DB Resistor sold separately) |
| KBMM SI-6 (9444) |
KBMM Signal Isolator Board (SI-6) |
| KBMM-125 (9449) |
SCR Chassis Speed, 115 VAC, thru 0.75 HP, 1.5 HP with heatsink, 90 VDC ARM |
| KBMM-225 (9450) |
SCR Chassis Speed, 230 VAC, thru 1.5 HP, 3 HP with heatsink, 180 VDC ARM |
| KBMM-225D (9451) |
SCR Chassis Speed, 115/230 VAC, thru 0.75/1.5 HP, 1.5/3 HP with heatsink, 90/180 VDC ARM |
| KBPB-125 (8900) |
SCR Chassis Relay Reversing, 115 VAC, thru 0.75 HP, 1.5 HP with heatsink, 90 VDC ARM |
| KBPB-225 (8901) |
SCR Chassis Relay Reversing, 230 VAC, thru 1.5 HP, 3 HP with heatsink, 180 VDC ARM |
| KBPC-225 Black (9391) |
SCR NEMA 4X DC Drive, 230 VAC, 3 HP, 180 VDC ARM |
| KBPC-225 White (9392) |
SCR NEMA 4X DC Drive, 230 VAC, 3 HP, 180 VDC ARM |
| KBPC-240D Black (9338) |
SCR NEMA 4X DC Drive, 115/230 VAC, thru 1.0/2.0 HP, 90/180 VDC ARM |
| KBPC-240D White (9342) |
SCR NEMA 4X DC Drive, 115/230 VAC, thru 1.0/2.0 HP, 90/180 VDC ARM |
| KBPC-PW APRM-PC (9378) |
KBPC/PW Anti Plug Reversing Module w/Switch Kit (for model 240D only) |
| KBPC-PW AUTO/MAN SWITCH (9377) |
KBPC/PW Auto/Manual Switch Kit |
| KBPC-PW FBR SWITCH (9339) |
KBPC/PW Forward/Brake/Reverse Mechanical Switch (for model 240D only) |
| KBPC-PW ON/OFFSWITCH (9341) |
KBPC/PW On/Off AC Line Switch (for model 240D only) |
| KBPC-PW S/S SWITCH (9393) |
KBPC/PW Start/Stop Switch Kit |
| KBPC-PW-AC RSJ SWITCH (9340) |
KBAC Run/Stop/Jog Switch Kit |
|
| Part Number: |
Description: |
| KBPI-240D (8500) |
NEMA 4X DC Indexer Drive, 115/230 VAC thru 1 HP, 90/180 VDC ARM |
| KBPI-240DR (8501) |
NEMA 4X DC Reversing Indexer Drive, 115/230 VAC thru 1 HP, 90/180 VDC ARM |
| KBPS-240D (8805) |
Power Supply, General Purpose, +/- 15 VDC @ 200 ma. |
| KBPW-240D Black (8401) |
PWM NEMA 4X DC Drive, 115/230 VAC, thru 1.0/2.0 HP, 90/180 VDC ARM |
| KBPW-240D White (8402) |
PWM NEMA 4X DC Drive, 115/230 VAC, thru 1.0/2.0 HP, 90/180 VDC ARM |
| KBRC AUTO/MAN SWITCH (9487) |
KBRC Auto/Manual Switch Kit |
| KBRC FSR SWITCH (9485) |
KBRC Forward/Reverse Switch Kit |
| KBRC ON/OFF SWITCH (9486) |
KBRC On/Off AC Line Switch Kit |
| KBRC SIRC (8842) |
KBRC Bi-Polar Signal Isolator (Installs inside KBRC) |
| KBRC-240D Black (8840) |
SCR NEMA 4X Regen Reversing, 115/230 VAC, thru 1.0/2.0 HP, 90/180 VDC ARM |
| KBRC-240D White (8841) |
SCR NEMA 4X Regen Reversing, 115/230 VAC, thru 1.0/2.0 HP, 90/180 VDC ARM |
| KBRF-100 (9107) |
CSA Approved AC Line Filter |
| KBRF-200A (9945) |
CE Approved AC Line Filter (Class A) |
| KBRF-250 (9509) |
CE Approved AC Line Filter (Class A) Mounts Under KBVF and "L" Bracket Controls |
| KBRF-300 (9484) |
CE Approved AC Line Filter (Class B) |
| KBRF-350 (9511) |
CE Approved AC Line Filter (Class B) Mounts Under KBVF and "L" Bracket Controls |
| KBRG 4QUADBOARD (8803) |
KBRG 4 Quad Accel/Decel Board, plugs into KBRG controls |
| KBRG ACSSY MTG KIT (8820) |
Accessory Mounting Kit for KBRG-212D/213D |
| KBRG MSB (8814) |
KBRG Multi-Speed, plugs into KBRG controls |
| KBRG PID (8804) |
KBRG PID Board, factory installed into KBRG controls |
| KBRG SI-4X (8801) |
KBRG Signal Isolator Board, plugs into KBRG Controls |
| KBRG-212D (8819) |
SCR Chassis Regen Reversing, 115/230 VAC, thru 0.75/2.5 HP, 90/180 VDC ARM |
| KBRG-225D (8800) |
SCR Chassis Regen Reversing, 115/230 VAC, thru 1.5/3.0 HP, 90/180 VDC ARM |
| KBRG-225DE (8808) |
SCR NEMA 1 Regen Reversing, 115/230 VAC, thru 1.5/3.0 HP, 90/180 VDC ARM |
| KBRG-240D (8802) |
SCR Chassis Regen Reversing, 115/230 VAC, thru 1.0/2.0 HP, 90/180 VDC ARM |
| KBRG-255 (8821) |
SCR Chassis Regen Reversing, 230 VAC, 5 HP, 180 VDC ARM |
| KBSI-240D (9431) |
Signal Isolator, Stand Alone |
| KBTC-125 (9100) |
SCR Chassis Torque, 115 VAC, 0-10 Amps ARM |
| KBTC-225 (9101) |
SCR Chassis Torque, 230 VAC, 0-10 Amps ARM |
| KBVF DIVF (9568) |
KBVF, Digital Interface Module, ModBus, RS-485 |
| KBVF FINGER SAFE COVER (9473) |
|
| KBVF MSB (9503) |
KBVF, Multi-Speed Board (Installs on end of KBVF) |
| KBVF SIVF (9474) |
KBVF Signal Isolator (Installs on end of KBVF) |
| KBVF SIVFR-2G (9597) |
KBVF Signal Isolator with Run/Fault Relay (Installs on end of KBVF) |
| KBVF-13 |
AC Chassis Inverter, 115 VAC 1p Input, 0.5 HP, 230 VAC 3p Output |
| KBVF-13 |
AC Chassis Inverter, 115 VAC 1p Input, 0.5 HP, 230 VAC 3p Output |
| KBVF-14 |
AC Chassis Inverter, 115 VAC 1p Input, 1.0 HP, 230 VAC 3p Output |
| KBVF-14 |
AC Chassis Inverter, 115 VAC 1p Input, 1.0 HP, 230 VAC 3p Output |
| KBVF-21D (9581) |
AC Chassis Inverter, 115/230 VAC 1p Input, 1.0 Amp 230 VAC 3p Output |
| KBVF-22D (9572) |
AC Chassis Inverter, 115/230 VAC 1p Input, 0.25 HP, 230 VAC 3p Output |
| KBVF-23 |
AC Chassis Inverter, 230 VAC 1p Input, 0.5 HP, 230 VAC 3p Output |
| KBVF-23 |
AC Chassis Inverter, 230 VAC 1p Input, 0.5 HP, 230 VAC 3p Output |
| KBVF-23D |
AC Chassis Inverter, 115/230 VAC 1p Input, 0.5 HP, 230 VAC 3p Output |
| KBVF-23D |
AC Chassis Inverter, 115/230 VAC 1p Input, 0.5 HP, 230 VAC 3p Output |
| KBVF-23D W/SIVFR (9476) |
AC Chassis Inverter, Dual Voltage Input, 0.5 HP, with Signal Isolator and Fault Relay |
| KBVF-24 |
AC Chassis Inverter, 230 VAC 1p Input, 1.0 HP, 230 VAC 3p Output |
| KBVF-24 |
AC Chassis Inverter, 230 VAC 1p Input, 1.0 HP, 230 VAC 3p Output |
| KBVF-24D |
AC Chassis Inverter, 115/230 VAC 1p Input, 1.0 HP, 230 VAC 3p Output |
| KBVF-24D |
AC Chassis Inverter, 115/230 VAC 1p Input, 1.0 HP, 230 VAC 3p Output |
| KBVF-24D W/SIVFR (9477) |
AC Chassis Inverter, 115/230 VAC 1p Input, 1.0 HP, with Signal Isolator and Fault Relay |
| KBVF-26D (9496) |
AC Chassis Inverter, 115/230 VAC 1p Input, 5.5 Amps 230 VAC 3p Output |
| KBVF-26D W/SIVFR (9478) |
AC Chassis Inverter, 115/230 VAC 1p Input, 5.5 Amp, with Signal Isolator and Fault Relay |
| KBVF-27 (9591) |
AC Chassis Inverter, 230 VAC 3p Input, 2.0 HP, 230 VAC 3p Output |
| KBVF-29 (9593) |
AC Chassis Inverter, 230 VAC 3p Input, 3.0 HP, 230 VAC 3p Output |
| KBVF-45 W/SIVFR (9590) |
AC Chassis Inverter, 460 VAC 3p Input, 3.0 HP, 460 VAC 3p Output |
| KBVF-48 W/SIVFR (9592) |
AC Chassis Inverter, 460 VAC 3p Input, 5.0 HP, 460 VAC 3p Output |
| KBVF-AC COM KIT (9582) |
Kit w/ DLM, Drive Link, USB Adapter, PC-DLM&DLM-Drive cables |
| KBVF-AC DLM (9549) |
DownLoad Module for KBVF & KBAC |
| KBVF-AC DLM-DRIVE CABLE (9584) |
Cable for DLM to KBVF/KBAC |
| KBVF-AC DRIVELINK (9583) |
DriveLink Programming Software |
| KBVF-AC PC-DLM CABLE (9663) |
Cable for DLM to PC Serial |
| KBVF-AC USB ADAPTER (9665) |
USB Adapter for DLM to PC Serial Cable |
| KBWC-16 |
115 V, 6 AMP, WALL MOUNT AC SPEED CONTROL |
| KBWD/KBWS PSM (8611) |
KBWD/KBWS Product Safety Module (PSM) |
| KBWD-13 (8609) |
PWM Chassis Speed, 115 VAC, 3.0 Amps 130 VDC ARM |
| KBWD-15 (8600) |
PWM Chassis Speed, 115 VAC, 5.0 Amps, w/TCL, 130 VDC ARM |
| KBWD-16 (8607) |
PWM Chassis Speed, 115 VAC, 6.0 Amps 130 VDC ARM |
| KBWM-120 (9380) |
SCR NEMA 1 Non-Reversing, 115 VAC, thru 0.33 HP, 90 VDC ARM |
| KBWM-240 (9381) |
SCR NEMA 1 Non-Reversing, 230 VAC, thru 0.75 HP, 180 VDC ARM |
| KBWS-12 (9490) |
PWM Chassis Speed, 115 VAC, 2.5 Amps w/Isolation, 130 VDC ARM (100 pc. Min.) |
| KBWS-15 (9491) |
PWM Chassis Speed, 115 VAC, 5.0 Amps w/Isolation, 130 VDC ARM (100 pc. Min.) |
| KBWS-22D (9492) |
PWM Chassis Speed, 115/230 VAC, 2.5 Amps, 90 to 130/180 to 220 VDC ARM w/Isolation |
| KBWS-25D (9493) |
PWM Chassis Speed, 115/230 VAC, 5.0 Amps, 90 to 130/180 to 220 VDC ARM w/Isolation |
| KBWT-110 (8603) |
PWM Chassis Non-Reversing, 115 VAC, 10.0 Amps 90 to 130 VDC ARM |
| KBWT-112 (8612) |
PWM Chassis Non-Reversing, 115 VAC, 12.0 Amps 90 to 130 VDC ARM |
| KBWT-16 (8614) |
PWM Chassis Non-Reversing, 115 VAC, 6.0 Amps 90 to 130 VDC ARM |
| KBWT-210 (8610) |
PWM Chassis Non-Reversing, 230 VAC, 10.0 Amps 180 to 260 VDC ARM |
| KBWT-26 (8615) |
PWM Chassis Non-Reversing, 230 VAC, 6.0 Amps 180 to 260 VDC ARM |
| KNOB & DIAL KIT LARGE (9832) |
Knob and Dial Kit - Large Dial Plate (2.25" x 2.06") |
| KNOB & DIAL KIT SMALL (9815) |
Knob and Dial Kit - Large Dial Plate (1.62" x 1.05") |
| MASTERFUSEKIT (9870) |
MASTER FUSE KIT, ASSORTED FUSES (700 PC) |
| MASTERRESISTORKIT (9830) |
MASTER PHR KIT, ASSORTED RESISTORS (300 PC) |
| POT, REPL NEMA-4 (9510) |
Replacement Potentiometer Kit for NEMA-4X Controls |
| POT, SPEED (9111) |
Conductive Plastic Pot, 5K |
| POT, SPEED W/SWITCH (9114) |
Conductive Plastic Pot, 5K with Switch |
| POT, SPEED WIRE WOUND (9831) |
Wire Wound Pot, 5K |
| RBM MODULE (9463) |
Run/Brake Module (Stand Alone) (DB Resistor sold separately) |
| RESISTOR-006OHMS (9850) |
PHR, .006 OHMS, 1.5 HP @ 90 VDC, 3 HP @ 180 VDC |
| RESISTOR-006OHMSKIT (9896) |
PHR KIT, .006 OHMS (50 PC) |
| RESISTOR-015OHMS (9842) |
PHR, .015 OHMS,.75 HP @ 90 VDC,1.5 HP @ 180 VDC |
| RESISTOR-015OHMSKIT (9894) |
PHR KIT, .015 OHMS (50 PC) |
| RESISTOR-01OHMS (9843) |
PHR, .01 OHMS, 1 HP @ 90 VDC, 2 HP & 180 VDC |
| RESISTOR-01OMSKIT (9895) |
PHR KIT, .01 OHMS (50 PC) |
| RESISTOR-025OHMS (9841) |
PHR, .025 OHMS, .5 HP @ 90 VDC, 1 HP @ 180 VDC |
| RESISTOR-025OHMSKIT (9893) |
PHR KIT, .025 OHMS (50 PC) |
| RESISTOR-035OHMS (9840) |
PHR, .035 OHMS, .33 HP @ 90 VDC, .75 HP @ 180 VDC |
| RESISTOR-035OHMSKIT (9892) |
PHR KIT, .035 OHMS (50 PC) |
| RESISTOR-05OHMS (9839) |
PHR, .05 OHMS, .25 HP @ 90 VDC, .5 HP @ 180 VDC |
| RESISTOR-05OHMSKIT (9891) |
PHR KIT, .05 OHMS (50 PC) |
| RESISTOR-10OHMS (9838) |
PHR, .1 OHMS, .1/8 TO 1/5 HP @ 90 VDC |
| RESISTOR-10OHMSKIT (9885) |
PHR KIT, 1.0 OHMS (50 PC) |
| RESISTOR-18OHMS (9837) |
PHR, .18 OHMS, 1/12 TO 1/8 HP @ 90 VDC |
| RESISTOR-18OHMSKIT (9889) |
PHR KIT, .18 OHMS (50 PC) |
| RESISTOR-1OHMS (9833) |
PHR, 1 OHM, 1/100 TO 1/50 HP @ 90 VDC |
| RESISTOR-1OHMSKIT (9890) |
PHR KIT, .1 OHMS (50 PC) |
| RESISTOR-25OHMS (9836) |
PHR, .25 OHM, 1/20 TO 1/12 HP @ 90 VDC |
| RESISTOR-25OHMSKIT (9888) |
PHR KIT, .25 OHMS (50 PC) |
| RESISTOR-2OHMS (9949) |
PHR, 2 OHM, PWM MOTORS ONLY |
| RESISTOR-2OHMSKIT (9950) |
PHR KIT, 2.0 OHMS (50 PC) |
| RESISTOR-35OHMS (9835) |
PHR, .35 OHM, 1/30 TO 1/20 HP @ 90 VDC |
| RESISTOR-35OHMSKIT (9887) |
PHR KIT, .35 OHMS (50 PC) |
| RESISTOR-51OHMS (9834) |
PHR, .51 OHM, 1/50 TO 1/30 HP @ 90 VDC |
| RESISTOR-51OHMSKIT (9886) |
PHR KIT, .51 OHMS (50 PC) |
| REVERSING SWITCH (9844) |
Forward/Brake/Reverse Switch (DB Resistor sold separately) |
| SEAL KIT, NEMA-4 (9518) |
Seal Kit for NEMA-4X Controls when Start/Stop Switch is removed |
|
