Back___________________Next__________________Home
Buy Your Industrial Control Products Here!
Gemco Parts Description Page 14
| Part Number |
Product Category |
Description |
|---|---|---|
| 2006-402-L-357-C | Brake Parts | Ametek Gemco Geared Rotary Limit Switch 2006-402-L-357-C 2006 = Type "K" Rotary Limit Switch 4 = NEMA 4 Rated Die Cast Enclosure, Watertight 02 = 2 Independent Circuits / Switches / Cams L = Left Hand Shaft Extension from the Enclosure. 1/2 Dia. x 1 & 1/2 Inch Extension with Woodruff Keyway & # 404 Woodruff Key 357 = 357 to 1 Gear Ratio. Cam Block turns once every 357 turns of the main shaft C = Double Pole Double Throw Snap Action Switches. Can be wired for either normally open or closed circuits. 8 Screw Terminals per Switch # 1950-4-B-A-DO 4.46 Shaft Turns required to reset the switch Maximum switch setting at 350 turns, minimum at 12 turns (5LBS) |
| 2006-402-L-40-A | Brake Parts | Ametek Gemco Geared Rotary Limit Switch 2006-402-L-40-A 2006 = Type "K" Rotary Limit Switch 4 = NEMA 4 Rated Die Cast Enclosure, Watertight 02 = 2 Independent Circuits / Switches / Cams L = Left Hand Shaft Extension from the Enclosure. 1/2 Dia. x 1 & 1/2 Inch Extension with Woodruff Keyway & # 404 Woodruff Key 40 = 40 to 1 Gear Ratio. Cam Block turns once every 40 turns of the main shaft A = Single Pole Double Throw Snap Action Switches. Can be wired for either normally open or closed circuits. 4 Screw Terminals per Switch # 1950-1-B-A-DO 1/2 Turns required to reset the switch Maximum switch setting at 35 turns, minimum at 1 turn C-H 10316H-157-1 (4LBS) |
| 2006-402-L-40-B | Brake Parts | Ametek Gemco Geared Rotary Limit Switch 2006-402-L-40-B 2006 = Type "K" Rotary Limit Switch 4 = NEMA 4 Rated Die Cast Enclosure, Watertight 02 = 2 Independent Circuits / Switches / Cams L = Left Hand Shaft Extension from the Enclosure. 1/2 Dia. x 1 & 1/2 Inch Extension with Woodruff Keyway & # 404 Woodruff Key 40 = 40 to 1 Gear Ratio. Cam Block turns once every 40 turns of the main shaft B = One Double Pole Double Throw Snap Action Switch. Can be wired for either normally open or a closed circuit. 8 Screw Terminals per Switch # 1950-4-B-A-DO and One Single Pole Double Throw Snap Action Switch. Can be wired for either normally open or a closed circuit. 4 Screw Terminals per Switch # 1950-1-B-A-DO 1/2 Turns required to reset the switch Maximum switch setting at 35 turns, minimum at 1 turn (5LBS) |
| 2006-402-L-40-C | Brake Parts | Ametek Gemco Geared Rotary Limit Switch 2006-402-L-40-C 2006 = Type "K" Rotary Limit Switch 4 = NEMA 4 Rated Die Cast Enclosure, Watertight 02 = 2 Independent Circuits / Switches / Cams L = Left Hand Shaft Extension from the Enclosure. 1/2 Dia. x 1 & 1/2 Inch Extension with Woodruff Keyway & # 404 Woodruff Key 40 = 40 to 1 Gear Ratio. Cam Block turns once every 40 turns of the main shaft C = Double Pole Double Throw Snap Action Switches. Can be wired for either normally open or closed circuits. 8 Screw Terminals per Switch # 1950-4-B-A-DO 1/2 Turns required to reset the switch Maximum switch setting at 35 turns, minimum at 1 turn (5LBS) |
| 2006-402-L-5-A | Brake Parts | Ametek Gemco Geared Rotary Limit Switch 2006-402-L-5-A 2006 = Type "K" Rotary Limit Switch 4 = NEMA 4 Rated Die Cast Enclosure, Watertight 02 = 2 Independent Circuits / Switches / Cams L = Left Hand Shaft Extension from the Enclosure. 1/2 Dia. x 1 & 1/2 Inch Extension with Woodruff Keyway & # 404 Woodruff Key 5 = 5 to 1 Gear Ratio. Cam Block turns once every 5 turns of the main shaft A = Single Pole Double Throw Snap Action Switches. Can be wired for either normally open or closed circuits. 4 Screw Terminals per Switch # 1950-1-B-A-DO 1/16 Turns required to reset the switch Maximum switch setting at 4 turns, minimum at 1/8 turn C-H 10316H-4556-1 (4LBS) |
| 2006-402-L-5-B | Brake Parts | Ametek Gemco Geared Rotary Limit Switch 2006-402-L-5-B 2006 = Type "K" Rotary Limit Switch 4 = NEMA 4 Rated Die Cast Enclosure, Watertight 02 = 2 Independent Circuits / Switches / Cams L = Left Hand Shaft Extension from the Enclosure. 1/2 Dia. x 1 & 1/2 Inch Extension with Woodruff Keyway & # 404 Woodruff Key 5 = 5 to 1 Gear Ratio. Cam Block turns once every 5 turns of the main shaft B = 1 Double Pole Double Throw Snap Action Switch. 1 Single Pole Double Throw Switch. Can be wired for either normally open or closed circuits. 4 Screw Terminals per Switch 1/16 Turns required to reset the switch Maximum switch setting at 4 turns, minimum at 1/8 turn (4LBS) |
| 2006-402-L-5-C | Brake Parts | Ametek Gemco Geared Rotary Limit Switch 2006-402-L-5-C 2006 = Type "K" Rotary Limit Switch 4 = NEMA 4 Rated Die Cast Enclosure, Watertight 02 = 2 Independent Circuits / Switches / Cams L = Left Hand Shaft Extension from the Enclosure. 1/2 Dia. x 1 & 1/2 Inch Extension with Woodruff Keyway & # 404 Woodruff Key 5 = 5 to 1 Gear Ratio. Cam Block turns once every 5 turns of the main shaft C = Double Pole Double Throw Snap Action Switches. Can be wired for either normally open or closed circuits. 8 Screw Terminals per Switch # 1950-4-B-A-DO 1/16 Turns required to reset the switch Maximum switch setting at 4 turns, minimum at 1/8 turn (4LBS) |
| 2006-402-L-60-A | Brake Parts | Ametek Gemco Geared Rotary Limit Switch 2006-402-L-60-A 2006 = Type "K" Rotary Limit Switch 4 = NEMA 4 Rated Watertight Die Cast Enclosure 02 = 2 Independent Circuits / Switches / Cams L = Left Hand Shaft Extension from the Enclosure. 1/2 Dia. x 1 & 1/2 Inch Extension with # 3 Woodruff Key & Keyway 60 = 60 to 1 Gear Ratio. Cam Block turns once every 60 turns of the main shaft A = Single Pole Double Throw Switches. Can be wired for either normally open or closed circuits. 4 Screw Terminals per Switch # 1950-1-B-A-DO 3/4 Turns required to reset the switch Maximum switch setting at 53 turns, minimum at 2 turns C-H 10316H-156-1 (4LBS) |
| 2006-402-L-60-C | Brake Parts | Ametek Gemco Geared Rotary Limit Switch 2006-402-L-60-C 2006 = Type "K" Rotary Limit Switch 4 = NEMA 4 Rated Watertight Die Cast Enclosure 02 = 2 Independent Circuits / Switches / Cams L = Left Hand Shaft Extension from the Enclosure. 1/2 Dia. x 1 & 1/2 Inch Extension with # 3 Woodruff Key & Keyway 60 = 60 to 1 Gear Ratio. Cam Block turns once every 60 turns of the main shaft C = Double Pole Double Throw Snap Action Switches. Can be wired for either normally open or closed circuits. 8 Screw Terminals per Switch # 1950-4-B-A-DO 3/4 Turns required to reset the switch Maximum switch setting at 53 turns, minimum at 2 turns (4LBS) |
| 2006-402-L-80-A | Brake Parts | Ametek Gemco Geared Rotary Limit Switch 2006-402-L-80-A 2006 = Type "K" Rotary Limit Switch 4 = NEMA 4 Rated Watertight Die Cast Enclosure 02 = 2 Independent Circuits / Switches / Cams L = Left Hand Shaft Extension from the Enclosure. 1/2 Dia. x 1 & 1/2 Inch Extension with # 3 Woodruff Key & Keyway 80 = 80 to 1 Gear Ratio. Cam Block turns once every 80 turns of the main shaft A = Single Pole Double Throw Switches. Can be wired for either normally open or closed circuits. 4 Screw Terminals per Switch # 1950-1-B-A-DO 1 Turn required to reset the switch Maximum switch setting at 72 turns, minimum at 2 & 1/2 turns C-H 10316H-4559-1 (4LBS) |
| 2006-402-L-80-C | Brake Parts | Ametek Gemco Geared Rotary Limit Switch 2006-402-L-80-C 2006 = Type "K" Rotary Limit Switch 4 = NEMA 4 Rated Watertight Die Cast Enclosure 02 = 2 Independent Circuits / Switches / Cams L = Left Hand Shaft Extension from the Enclosure. 1/2 Dia. x 1 & 1/2 Inch Extension with # 3 Woodruff Key & Keyway 80 = 80 to 1 Gear Ratio. Cam Block turns once every 80 turns of the main shaft C= Double Pole Double Throw Switches. Can be wired for either normally open or closed circuits. 8 Screw Terminals per Switch # 1950-4-B-A-DO 1 Turn required to reset the switch Maximum switch setting at 72 turns, minimum at 2 & 1/2 turns (4LBS) |
| 2006-402-R-10-A | Brake Parts | Ametek Gemco Geared Rotary Limit Switch 2006-402-R-10-A 2006 = Type "K" Rotary Limit Switch 4 = NEMA 4 Rated Die Cast Enclosure, Watertight 02 = 2 Independent Circuits / Switches / Cams R = Right Hand Shaft Extension from the Enclosure. 1/2 Dia. x 1 & 1/2 Inch Extension with Woodruff Keyway & # 404 Woodruff Key 10 = 10 to 1 Gear Ratio. Cam Block turns once every 10 turns of the main shaft A = Single Pole Double Throw Snap Action Switches. Can be wired for either normally open or closed circuits. 4 Screw Terminals per Switch # 1950-1-B-A-DO 1/8 Turns required to reset the switch Maximum switch setting at 8 & 1/2 turns, minimum at 1/4 turn (4LBS) |
| 2006-402-R-120-A | Brake Parts | Ametek Gemco Geared Rotary Limit Switch 2006-402-R-120-A 2006 = Type "K" Rotary Limit Switch 4 = NEMA 4 Rated Die Cast Enclosure, Watertight 02 = 2 Independent Circuits / Switches / Cams R = Right Hand Shaft Extension from the Enclosure. 1/2 Dia. x 1 & 1/2 Inch Extension with Woodruff Keyway & # 404 Woodruff Key 120 = 120 to 1 Gear Ratio. Cam Block turns once every 120 turns of the main shaft A = Single Pole Double Throw Snap Action Switches. Can be wired for either normally open or closed circuits. 4 Screw Terminals per Switch # 1950-1-B-A-DO 1/2 Turns required to reset the switch Maximum switch setting at 108 turns, minimum at 3 turns C-H 10316H-179-1 (4LBS) |
| 2006-402-R-120-C | Brake Parts | Ametek Gemco Geared Rotary Limit Switch 2006-402-R-120-C 2006 = Type "K" Rotary Limit Switch 4 = NEMA 4 Rated Die Cast Enclosure, Watertight 02 = 2 Independent Circuits / Switches / Cams R = Right Hand Shaft Extension from the Enclosure. 1/2 Dia. x 1 & 1/2 Inch Extension with Woodruff Keyway & # 404 Woodruff Key 120 = 120 to 1 Gear Ratio. Cam Block turns once every 120 turns of the main shaft C = Double Pole Double Throw Snap Action Switches. Can be wired for either normally open or closed circuits. 8 Screw Terminals per Switch # 1950-4-B-A-DO (5LBS) |
| 2006-402-R-20-A | Brake Parts | Ametek Gemco Geared Rotary Limit Switch 2006-402-R-20-A 2006 = Type "K" Rotary Limit Switch 4 = NEMA 4 Rated Watertight Die Cast Enclosure 02 = 2 Independent Circuits / Switches / Cams R = Right Hand Shaft Extension from the Enclosure. 1/2 Dia. x 1 & 1/2 Inch Extension with # 3 Woodruff Key & Keyway 20 = 20 to 1 Gear Ratio. Cam Block turns once every 10 turns of the main shaft A = Single Pole Double Throw Switches. Can be wired for either normally open or closed circuits. 4 Screw Terminals per Switch # 1950-1-B-A-DO (4LBS) |
| 2006-402-R-270-A | Brake Parts | Ametek Gemco Geared Rotary Limit Switch 2006-402-R-270-A 2006 = Type "K" Rotary Limit Switch 4 = NEMA 4 Rated Die Cast Enclosure, Watertight 02 = 2 Independent Circuits / Switches / Cams R = Right Hand Shaft Extension from the Enclosure. 1/2 Dia. x 1 & 1/2 Inch Extension with Woodruff Keyway & # 404 Woodruff Key 270 = 270 to 1 Gear Ratio. Cam Block turns once every 270 turns of the main shaft A = Single Pole Double Throw Snap Action Switches. Can be wired for either normally open or closed circuits. 4 Screw Terminals per Switch # 1950-1-B-A-DO 3.375 Shaft Turns required to reset the switch Maximum switch setting at 236 turns, minimum at 6.75 turns C-H 10316H-4606-1 (5LBS) |
| 2006-402-R-30-A | Brake Parts | Ametek Gemco Geared Rotary Limit Switch 2006-402-R-30-A 2006 = Type "K" Rotary Limit Switch 4 = NEMA 4 Rated Die Cast Enclosure, Watertight 02 = 2 Independent Circuits / Switches / Cams R = Right Hand Shaft Extension from the Enclosure. 1/2 Dia. x 1 & 1/2 Inch Extension with Woodruff Keyway & # 404 Woodruff Key 30 = 30 to 1 Gear Ratio. Cam Block turns once every 30 turns of the main shaft A = Single Pole Double Throw Snap Action Switches. Can be wired for either normally open or closed circuits. 4 Screw Terminals per Switch # 1950-1-B-A-DO 3/8 Shaft Turn required to reset the switch Maximum switch setting at 26 turns, minimum at 1 turn C-H 10316H-4561-1 (5LBS) |
| 2006-402-R-357-A | Brake Parts | Ametek Gemco Geared Rotary Limit Switch 2006-402-R-357-A 2006 = Type "K" Rotary Limit Switch 4 = NEMA 4 Rated Watertight Die Cast Enclosure 02 = 2 Independent Circuits / Switches / Cams R = Right Hand Shaft Extension from the Enclosure. 1/2 Dia. x 1 & 1/2 Inch Extension with # 3 Woodruff Key & Keyway 357 = 357 to 1 Gear Ratio. Cam Block turns once every 357 turns of the main shaft R = 1950-1408 Switches 4.46 Turns to Reset (4LBS) |
| 2006-402-R-40-A | Brake Parts | Ametek Gemco Geared Rotary Limit Switch 2006-402-R-40-A 2006 = Type "K" Rotary Limit Switch 4 = NEMA 4 Rated Die Cast Enclosure, Watertight 02 = 2 Independent Circuits / Switches / Cams L = Right Hand Shaft Extension from the Enclosure. 1/2 Dia. x 1 & 1/2 Inch Extension with Woodruff Keyway & # 404 Woodruff Key 40 = 40 to 1 Gear Ratio. Cam Block turns once every 40 turns of the main shaft A = Single Pole Double Throw Snap Action Switches. Can be wired for either normally open or closed circuits. 4 Screw Terminals per Switch # 1950-1-B-A-DO 1/2 Turns required to reset the switch Maximum switch setting at 35 turns, minimum at 1 turn C-H 10316H-181-1 (4LBS) |
| 2006-402-R-40-C | Brake Parts | Ametek Gemco Geared Rotary Limit Switch 2006-402-R-40-C 2006 = Type "K" Rotary Limit Switch 4 = NEMA 4 Rated Watertight Die Cast Enclosure 02 = 2 Independent Circuits / Switches / Cams R = Right Hand Shaft Extension from the Enclosure. 1/2 Dia. x 1 & 1/2 Inch Extension with # 3 Woodruff Key & Keyway 40 = 40 to 1 Gear Ratio. Cam Block turns once every 40 turns of the main shaft C = Double Pole Double Throw Switches. Can be wired for either normally open or closed circuits. 8 Screw Terminals per Switch (4LBS) |
| 2006-402-R-40-R | Brake Parts | Ametek Gemco Geared Rotary Limit Switch 2006-402-R-40-R 2006 = Type "K" Rotary Limit Switch 4 = NEMA 4 Rated Watertight Die Cast Enclosure 02 = 2 Independent Circuits / Switches / Cams R = Right Hand Shaft Extension from the Enclosure. 1/2 Dia. x 1 & 1/2 Inch Extension with # 3 Woodruff Key & Keyway 40 = 40 to 1 Gear Ratio. Cam Block turns once every 40 turns of the main shaft R = 1950-1408 Slow Make Slow Break Switches, Single Pole Double Throw S.P.D.T., Can be wired for Normally Open or Closed Circuits, 4 Screw Terminals per Switch 1/2 Turn to Reset Switch (4LBS) |
| 2006-402-R-5-A | Brake Parts | Ametek Gemco Geared Rotary Limit Switch 2006-402-R-5-A 2006 = Type "K" Rotary Limit Switch 4 = NEMA 4 Rated Die Cast Enclosure, Watertight 02 = 2 Independent Circuits / Switches / Cams R = Right Hand Shaft Extension from the Enclosure. 1/2 Dia. x 1 & 1/2 Inch Extension with Woodruff Keyway & # 404 Woodruff Key 5 = 5 to 1 Gear Ratio. Cam Block turns once every 5 turns of the main shaft A = Single Pole Double Throw Snap Action Switches. Can be wired for either normally open or closed circuits. 4 Screw Terminals per Switch # 1950-1-B-A-DO C-H 10316H-1018-1 (4LBS) |
| 2006-402-R-5-C | Brake Parts | Ametek Gemco Geared Rotary Limit Switch 2006-402-R-5-C 2006 = Type "K" Rotary Limit Switch 4 = NEMA 4 Rated Die Cast Enclosure, Watertight 02 = 2 Independent Circuits / Switches / Cams R = Right Hand Shaft Extension from the Enclosure. 1/2 Dia. x 1 & 1/2 Inch Extension with Woodruff Keyway & # 404 Woodruff Key 5 = 5 to 1 Gear Ratio. Cam Block turns once every 5 turns of the main shaft C = Double Pole Double Throw Snap Action Switches. Can be wired for either normally open or closed circuits. 8 Screw Terminals per Switch # 1950-4-B-A-DO (5LBS) |
| 2006-402-R-60-A | Brake Parts | Ametek Gemco Geared Rotary Limit Switch 2006-402-R-60-A 2006 = Type "K" Rotary Limit Switch 4 = NEMA 4 Rated Watertight Die Cast Enclosure 02 = 2 Independent Circuits / Switches / Cams R = Right Hand Shaft Extension from the Enclosure. 1/2 Dia. x 1 & 1/2 Inch Extension with # 3 Woodruff Key & Keyway 60 = 60 to 1 Gear Ratio. Cam Block turns once every 60 turns of the main shaft A = Single Pole Double Throw Switches. Can be wired for either normally open or closed circuits. 4 Screw Terminals per Switch # 1950-1-B-A-DO 3/4 Turns required to reset the switch Maximum switch setting at 53 turns, minimum at 2 turns C-H 10316H-180-1 (5LBS) |
| 2006-402-R-80-A | Brake Parts | Ametek Gemco Geared Rotary Limit Switch 2006-402-R-80-A 2006 = Type "K" Rotary Limit Switch 4 = NEMA 4 Rated Watertight Die Cast Enclosure 02 = 2 Independent Circuits / Switches / Cams R = Right Hand Shaft Extension from the Enclosure. 1/2 Dia. x 1 & 1/2 Inch Extension with # 3 Woodruff Key & Keyway 80 = 80 to 1 Gear Ratio. Cam Block turns once every 80 turns of the main shaft A = Single Pole Double Throw Switches. Can be wired for either normally open or closed circuits. 4 Screw Terminals per Switch # 1950-1-B-A-DO 1 Turns required to reset the switch Maximum switch setting at 72 turns, minimum at 2 & 1/2 turns C-H 10316H-4563-1 (5LBS) |
| 2006-404-L-10-A | Brake Parts | Ametek Gemco Geared Rotary Limit Switch 2006-404-L-10-A 2006 = Type "K" Rotary Limit Switch 4 = NEMA 4 Rated Watertight Die Cast Enclosure 04 = 4 Independent Circuits / Switches / Cams L = Left Hand Shaft Extension from the Enclosure. 1/2 Dia. x 1 & 1/2 Inch Extension with # 3 Woodruff Key & Keyway 10 = 10 to 1 Gear Ratio. Cam Block turns once every 10 turns of the main shaft A = Single Pole Double Throw Switches. Can be wired for either normally open or closed circuits. 4 Screw Terminals per Switch # 1950-1-B-A-D0 1/8 Turn to Reset Switch C-H 10316H-1026-1 (6LBS) |
| 2006-404-L-10-E | Brake Parts | Ametek Gemco Geared Rotary Limit Switch 2006-404-L-10-E 2006 = Type "K" Rotary Limit Switch 4 = NEMA 4 Rated Die Cast Enclosure, Watertight 04 = 4 Independent Circuits / Switches / Cams L = Left Hand Shaft Extension from the Enclosure. 1/2 Dia. x 1 & 1/2 Inch Extension with Woodruff Keyway & # 404 Woodruff Key 10 = 10 to 1 Gear Ratio. Cam Block turns once every 10 turns of the main shaft E = Double Pole Double Throw Snap Action Switches. Can be wired for either normally open or closed circuits. 8 Screw Terminals per Switch # 1950-4-B-A-DO 1/8 Turn of Main Shaft is required to Reset the Switch Maximum Switch Setting is at 8 & 1/2 Turns, Minimum is at 1/4 Turn (6LBS) |
| 2006-404-L-1080-A | Brake Parts | Ametek Gemco Geared Rotary Limit Switch 2006-404-L-1080-A 2006 = Type "K" Rotary Limit Switch 4 = NEMA 4 Rated Die Cast Enclosure, Watertight 04 = 4 Independent Circuits / Switches / Cams L = Left Hand Shaft Extension from the Enclosure. 1/2 Dia. x 1 & 1/2 Inch Extension with Woodruff Keyway & # 404 Woodruff Key 357 = 1080 to 1 Gear Ratio. Cam Block turns once every 1080 turns of the main shaft A = Single Pole Double Throw Snap Action Switches. Can be wired for either normally open or closed circuits. 4 Screw Terminals per Switch # 1950-1-B-A-DO C-H 10316H-173-1 (6LBS) |
| 2006-404-L-120-A | Brake Parts | Ametek Gemco Geared Rotary Limit Switch 2006-404-L-120-A 2006 = Type "K" Rotary Limit Switch 4 = NEMA 4 Rated Die Cast Enclosure, Watertight 04 = 4 Independent Circuits / Switches / Cams L = Left Hand Shaft Extension from the Enclosure. 1/2 Dia. x 1 & 1/2 Inch Extension with Woodruff Keyway & # 404 Woodruff Key 120 = 120 to 1 Gear Ratio. Cam Block turns once every 120 turns of the main shaft A = Single Pole Double Throw Snap Action Switches. Can be wired for either normally open or closed circuits. 4 Screw Terminals per Switch # 1950-1-B-A-DO 1 & 1/2 Turns required to reset the switch Maximum switch setting at 108 turns, minimum 3 turns C-H 10316H-158-1 (6LBS) |
| 2006-404-L-120-C | Brake Parts | Ametek Gemco Series 2000 Type K Rotary Limit Switch, 4 Independent Circuits / Cams / Switches, NEMA 4 Enclosure, Left Hand Shaft Extension, 120 to 1 Gear Ratio, Qty 2, S.P.D.T. Single Pole Double Throw Precision Snap Switches & Qty 2, D.P.D.T. Double Pole Double Throw Precision Snap Switches. (6LBS) |
| 2006-404-L-120-E | Brake Parts | Ametek Gemco Series 2000 Type K Rotary Limit Switch, 4 Independent Circuits / Cams / Switches, NEMA 4 Enclosure, Left Hand Shaft Extension, 120 to 1 Gear Ratio, D.P.D.T. Double Pole Double Throw Precision Snap Switches (6LBS) |
| 2006-404-L-20-A | Brake Parts | Ametek Gemco Geared Rotary Limit Switch 2006-404-L-20-A 2006 = Type "K" Rotary Limit Switch 4 = NEMA 4 Rated Watertight Die Cast Enclosure 04 = 4 Independent Circuits / Switches / Cams L = Left Hand Shaft Extension from the Enclosure. 1/2 Dia. x 1 & 1/2 Inch Extension with # 3 Woodruff Key & Keyway 20 = 20 to 1 Gear Ratio. Cam Block turns once every 20 turns of the main shaft A = Single Pole Double Throw Switches. Can be wired for either normally open or closed circuits. 4 Screw Terminals per Switch # 1950-1-B-A-D0 1/4 Turn to Reset Switch C-H 10316H-1027-1 (6LBS) |
| 2006-404-L-20-C | Brake Parts | Ametek Gemco Series 2000 Type K Rotary Limit Switch, 4 Independent Circuits / Cams / Switches, NEMA 4 Enclosure, Left Hand Shaft Extension, 20 to 1 Gear Ratio, Two D.P.D.T. Double Pole Double Throw Precision Snap Switches & Two S.P.D.T. Single Pole Double Throw Precision Snap Switches (6LBS) |
| 2006-404-L-20-E | Brake Parts | Ametek Gemco Geared Rotary Limit Switch 2006-404-L-20-E 2006 = Type "K" Rotary Limit Switch 4 = NEMA 4 Rated Die Cast Enclosure, Watertight 04 = 4 Independent Circuits / Switches / Cams L = Left Hand Shaft Extension from the Enclosure. 1/2 Dia. x 1 & 1/2 Inch Extension with Woodruff Keyway & # 404 Woodruff Key 20 = 20 to 1 Gear Ratio. Cam Block turns once every 20 turns of the main shaft E = Double Pole Double Throw Snap Action Switches. Can be wired for either normally open or closed circuits. 8 Screw Terminals per Switch # 1950-4-B-A-DO 1/4 Turn of Main Shaft is required to Reset the Switch Maximum Switch Setting is at 17 Turns, Minimum is at 1/2 Turn (6LBS) |
| 2006-404-L-270-A | Brake Parts | Ametek Gemco Geared Rotary Limit Switch 2006-404-L-270-A 2006 = Type "K" Rotary Limit Switch 4 = NEMA 4 Rated Die Cast Enclosure, Watertight 04 = 4 Independent Circuits / Switches / Cams L = Left Hand Shaft Extension from the Enclosure. 1/2 Dia. x 1 & 1/2 Inch Extension with Woodruff Keyway & # 404 Woodruff Key 270 = 270 to 1 Gear Ratio. Cam Block turns once every 270 turns of the main shaft A = Single Pole Double Throw Snap Action Switches. Can be wired for either normally open or closed circuits. 4 Screw Terminals per Switch # 1950-1-B-A-DO C-H 10316H-4600-1 (6LBS) |
| 2006-404-L-270-C | Brake Parts | Ametek Gemco Series 2000 Type K Rotary Limit Switch, 4 Independent Circuits / Cams / Switches, NEMA 4 Enclosure, Left Hand Shaft Extension, 270 to 1 Gear Ratio, Two D.P.D.T. Double Pole Double Throw Precision Snap Switches & Two S.P.D.T. Single Pole Double Throw Precision Snap Switches (6LBS) |
| 2006-404-L-30-A | Brake Parts | Ametek Gemco Geared Rotary Limit Switch 2006-404-L-30-A 2006 = Type "K" Rotary Limit Switch 4 = NEMA 4 Rated Watertight Die Cast Enclosure 04 = 4 Independent Circuits / Switches / Cams L = Left Hand Shaft Extension from the Enclosure. 1/2 Dia. x 1 & 1/2 Inch Extension with # 3 Woodruff Key & Keyway 30 = 30 to 1 Gear Ratio. Cam Block turns once every 30 turns of the main shaft A = Single Pole Double Throw Switches. Can be wired for either normally open or closed circuits. 4 Screw Terminals per Switch # 1950-1-B-A-DO 3/8 turn to Reset Switch C-H 10316H-4569-1 (6LBS) |
| 2006-404-L-30-E | Brake Parts | Ametek Gemco Geared Rotary Limit Switch 2006-404-L-30-E 2006 = Type "K" Rotary Limit Switch 4 = NEMA 4 Rated Die Cast Enclosure, Watertight 04 = 4 Independent Circuits / Switches / Cams L = Left Hand Shaft Extension from the Enclosure. 1/2 Dia. x 1 & 1/2 Inch Extension with Woodruff Keyway & # 404 Woodruff Key 30 = 30 to 1 Gear Ratio. Cam Block turns once every 30 turns of the main shaft E = Double Pole Double Throw Snap Action Switches. Can be wired for either normally open or closed circuits. 8 Screw Terminals per Switch # 1950-4-B-A-DO 3/8 Turn of Main Shaft is required to Reset the Switch Maximum Switch Setting is at 26 Turns, Minimum is at 1 Turn (6LBS) |
| 2006-404-L-357-A | Brake Parts | Ametek Gemco Geared Rotary Limit Switch 2006-404-L-357-A 2006 = Type "K" Rotary Limit Switch 4 = NEMA 4 Rated Die Cast Enclosure, Watertight 04 = 4 Independent Circuits / Switches / Cams L = Left Hand Shaft Extension from the Enclosure. 1/2 Dia. x 1 & 1/2 Inch Extension with Woodruff Keyway & # 404 Woodruff Key 357 = 357 to 1 Gear Ratio. Cam Block turns once every 270 turns of the main shaft A = Single Pole Double Throw Snap Action Switches. Can be wired for either normally open or closed circuits. 4 Screw Terminals per Switch # 1950-1-B-A-DO C-H 10316H-175-1 (6LBS) |
| 2006-404-L-357-E | Brake Parts | Ametek Gemco Series 2000 Type K Rotary Limit Switch, 4 Independent Circuits / Cams / Switches, NEMA 4 Enclosure, Left Hand Shaft Extension, 357 to 1 Gear Ratio, D.P.D.T. Double Pole Double Throw Precision Snap Switches (6LBS) |
| 2006-404-L-40-A | Brake Parts | Ametek Gemco Geared Rotary Limit Switch 2006-404-L-40-A 2006 = Type "K" Rotary Limit Switch 4 = NEMA 4 Rated Watertight Die Cast Enclosure 04 = 4 Independent Circuits / Switches / Cams L = Left Hand Shaft Extension from the Enclosure. 1/2 Dia. x 1 & 1/2 Inch Extension with # 3 Woodruff Key & Keyway 40 = 40 to 1 Gear Ratio. Cam Block turns once every 40 turns of the main shaft A = Single Pole Double Throw Switches. Can be wired for either normally open or closed circuits. 4 Screw Terminals per Switch Switch # 1950-1-B-A-D0 Maximum switch setting at 35 turns, minimum at 1 turn 1/2 Turn to Reset Switch C-H 10316H-160-1 (6LBS) |
| 2006-404-L-40-E | Brake Parts | Ametek Gemco Geared Rotary Limit Switch 2006-404-L-40-E 2006 = Type "K" Rotary Limit Switch 4 = NEMA 4 Rated Die Cast Enclosure, Watertight 04 = 4 Independent Circuits / Switches / Cams L = Left Hand Shaft Extension from the Enclosure. 1/2 Dia. x 1 & 1/2 Inch Extension with Woodruff Keyway & # 404 Woodruff Key 40 = 40 to 1 Gear Ratio. Cam Block turns once every 40 turns of the main shaft E = Double Pole Double Throw Snap Action Switches. Can be wired for either normally open or closed circuits. 8 Screw Terminals per Switch # 1950-4-B-A-DO 1/2 Turn of Main Shaft is required to Reset the Switch Maximum Switch Setting is at 35 Turns, Minimum is at 1 Turn (6LBS) |
| 2006-404-L-5-A | Brake Parts | Ametek Gemco Geared Rotary Limit Switch 2006-404-L-5-A 2006 = Type "K" Rotary Limit Switch 4 = NEMA 4 Rated Watertight Die Cast Enclosure 04 = 4 Independent Circuits / Switches / Cams L = Left Hand Shaft Extension from the Enclosure. 1/2 Dia. x 1 & 1/2 Inch Extension with # 3 Woodruff Key & Keyway 5 = 5 to 1 Gear Ratio. Cam Block turns once every 5 turns of the main shaft A = Single Pole Double Throw Switches. Can be wired for either normally open or closed circuits. 4 Screw Terminals per Switch # 1950-1-B-A-DO 1/16 Turn to Reset Switch Maximum switch setting at 4 turns, minimum at 1/8th turn C-H 10316H-4568-1 (6LBS) |
| 2006-404-L-5-C | Brake Parts | Ametek Gemco Series 2000 Type K Rotary Limit Switch, 4 Independent Circuits / Cams / Switches, NEMA 4 Enclosure, Left Hand Shaft Extension, 5 to 1 Gear Ratio, Two D.P.D.T. Double Pole Double Throw Precision Snap Switches & Two S.P.D.T. Single Pole Double Throw Precision Snap Switches (6LBS) |
| 2006-404-L-5-E | Brake Parts | Ametek Gemco Series 2000 Type K Rotary Limit Switch, 4 Independent Circuits / Cams / Switches, NEMA 4 Enclosure, Left Hand Shaft Extension, 5 to 1 Gear Ratio, D.P.D.T. Double Pole Double Throw Precision Snap Switches (6LBS) |
| 2006-404-L-60-A | Brake Parts | Ametek Gemco Geared Rotary Limit Switch 2006-404-L-60-A 2006 = Type "K" Rotary Limit Switch 4 = NEMA 4 Rated Watertight Die Cast Enclosure 04 = 4 Independent Circuits / Switches / Cams L = Left Hand Shaft Extension from the Enclosure. 1/2 Dia. x 1 & 1/2 Inch Extension with # 3 Woodruff Key & Keyway 60 = 60 to 1 Gear Ratio. Cam Block turns once every 60 turns of the main shaft A = Single Pole Double Throw Switches. Can be wired for either normally open or closed circuits. 4 Screw Terminals per Switch # 1950-1-B-A-DO 3/4 Turn to Reset Switch C-H 10316H-159-1 (5LBS) |
| 2006-404-L-60-C | Brake Parts | Ametek Gemco Series 2000 Type K Rotary Limit Switch, 4 Independent Circuits / Cams / Switches, NEMA 4 Enclosure, Left Hand Shaft Extension, 60 to 1 Gear Ratio, Two S.P.D.T. Single Pole Double Throw Precision Snap Switches & Two D.P.D.T. Double Pole Double Throw Switches (5LBS) |
| 2006-404-L-60-D | Brake Parts | Ametek Gemco Series 2000 Type K Rotary Limit Switch, 4 Independent Circuits / Cams / Switches, NEMA 4 Enclosure, Left Hand Shaft Extension, 60 to 1 Gear Ratio, Three D.P.D.T. Double Pole Double Throw Precision Snap Switches & One S.P.D.T. Single Pole Double Throw Precision Snap Switches (6LBS) |
| 2006-404-L-60-E | Brake Parts | Ametek Gemco Geared Rotary Limit Switch 2006-404-L-60-E 2006 = Type "K" Rotary Limit Switch 4 = NEMA 4 Rated Die Cast Enclosure, Watertight 04 = 4 Independent Circuits / Switches / Cams L = Left Hand Shaft Extension from the Enclosure. 1/2 Dia. x 1 & 1/2 Inch Extension with Woodruff Keyway & # 404 Woodruff Key 60 = 60 to 1 Gear Ratio. Cam Block turns once every 60 turns of the main shaft E = Double Pole Double Throw Snap Action Switches. Can be wired for either normally open or closed circuits. 8 Screw Terminals per Switch # 1950-4-B-A-DO 3/4 Turn of Main Shaft is required to Reset the Switch Maximum Switch Setting is at 53 Turns, Minimum is at 2 Turns (6LBS) |
| 2006-404-L-80-A | Brake Parts | Ametek Gemco Geared Rotary Limit Switch 2006-404-L-80-A 2006 = Type "K" Rotary Limit Switch 4 = NEMA 4 Rated Watertight Die Cast Enclosure 04 = 4 Independent Circuits / Switches / Cams L = Left Hand Shaft Extension from the Enclosure. 1/2 Dia. x 1 & 1/2 Inch Extension with # 3 Woodruff Key & Keyway 80 = 80 to 1 Gear Ratio. Cam Block turns once every 80 turns of the main shaft A = Single Pole Double Throw Switches. Can be wired for either normally open or closed circuits. 4 Screw Terminals per Switch Switch # 1950-1-B-A-DO Maximum switch setting at 72 turns, minimum at 2 & 1/2 turns 1 Turn to Reset Switch C-H 10316H-4571-1 (6LBS) |
| 2006-404-L-80-E | Brake Parts | Ametek Gemco Geared Rotary Limit Switch 2006-404-L-80-E 2006 = Type "K" Rotary Limit Switch 4 = NEMA 4 Rated Die Cast Enclosure, Watertight 04 = 4 Independent Circuits / Switches / Cams L = Left Hand Shaft Extension from the Enclosure. 1/2 Dia. x 1 & 1/2 Inch Extension with Woodruff Keyway & # 404 Woodruff Key 80 = 80 to 1 Gear Ratio. Cam Block turns once every 80 turns of the main shaft E = Double Pole Double Throw Snap Action Switches. Can be wired for either normally open or closed circuits. 8 Screw Terminals per Switch # 1950-4-B-A-DO 1 Turn of Main Shaft is required to Reset the Switch Maximum Switch Setting is at 72 Turns, Minimum is at 2 & 1/2 Turns (6LBS) |
| 2006-404-L40-A | Brake Parts | Ametek Gemco Geared Rotary Limit Switch 2006-404-L-40-A 2006 = Type "K" Rotary Limit Switch 4 = NEMA 4 Rated Watertight Die Cast Enclosure 04 = 4 Independent Circuits / Switches / Cams L = Left Hand Shaft Extension from the Enclosure. 1/2 Dia. x 1 & 1/2 Inch Extension with # 3 Woodruff Key & Keyway 40 = 40 to 1 Gear Ratio. Cam Block turns once every 40 turns of the main shaft A = Single Pole Double Throw Switches. Can be wired for either normally open or closed circuits. 4 Screw Terminals per Switch # 1950-1-B-A-DO 1/2 Turn to Reset Switch (6LBS) |
| 2020-1 | Brake Parts | Ametek Gemco Rotary Limit Switch. Now Obsolete, 1996. Series 2020 Traveling Nut Limit Switch. Qty. 2, 1950-1-B-A-DO S.P.D.T. Precision Snap Switches, Switches can be adjusted between 5 and 100 revolutions of the input shaft. 1/2 inch diameter input shaft. 10 AMP., 600 Volt Maximum |
| 2110-1404 | Brake Parts | Ametek Gemco Shut Height Monitor Series 2110 LDT Board Digital Output / Sourcing Specially Engineered Brackets C0966900 1/4 |
| 2110-L1-K0-D0-A0-N0 | Brake Parts | Ametek Gemco Shut Height Monitor Model 2110-L1-K0-D0-A0-N0 2 Channel Analog Output L1 = 952 Digital Input Board K0 = Without Relay Board D0 = Without Digital Output Board A0 = Without Analog Board N0 = No Enclosure Supplied. NEMA 4 & 12 are available |
| 2110-R1-K0-D0-A0-N0 | Brake Parts | Ametek Gemco Shut Height Monitor Model 2110-R1-K0-D0-A0-N0 2 Channel Analog Output R1 = Resolver Board Input K0 = Without Relay Board D0 = Without Digital Output Board A0 = Without Analog Board N0 = No Enclosure Supplied. NEMA 4 & 12 are available |
| 2110-R1-K0-D0-A1-N0 | Brake Parts | Ametek Gemco Shut Height Monitor Model 2110-R1-K0-D0-A1-N0 R1 = Resolver Board Input K0 = Without Relay Board D0 = Without Digital Output Board A1 = Two Channel Analog Output, Programmable for Voltage or Current N0 = No Enclosure Supplied. NEMA 4 & 12 are available |
| 2110-R1-K0-D2-A0-N4 | Brake Parts | Ametek Gemco Shut Height Monitor Model 2110-R1-K1-D2-A0-N4 R1 = Resolver Board Input K0 = Without Relay Board D2 = Sourcing Digital Output Board A0 = Without Analog Board N4 = NEMA 4 Enclosure |
| 2110-R1-K0-D2-A1-N0 | Brake Parts | Ametek Gemco Shut Height Monitor Model 2110-R1-K0-D2-A1-N4 R1 = Resolver Board Input K0 = Without Relay Board D2 = Sourcing Digital Output Board A1 = Two Channel Analog Output Programmable for Voltage or Current N4 = NEMA 4 Rated Enclosure |
| 2110-R1-K0-D3-A0-N0 | Brake Parts | Ametek Gemco Shut Height Monitor Model 2110-R1-K0-D3-A0-N0 2110 - Shut Height Monitor R1 = Resolver Board Input K0 = Without Relay Board D3 = TTL Digital Output Board A0 = Without Analog Board N0 = No Enclosure Supplied. NEMA 4 & 12 are available |
| 2110-R1-K1-D0-A0-N0 | Brake Parts | Ametek Gemco Shut Height Monitor Model 2110-R1-K1-D2-A0-N0 R1 = Resolver Board Input K1 = With Relay Board D0 = Without Digital Output Board A0 = Without Analog Board N0 = No Enclosure |
| 2110-R1-K1-D0-A0-N4 | Brake Parts | Ametek Gemco Shut Height Monitor Model 2110-R1-K1-D2-A0-N4 R1 = Resolver Board Input K1 = With Relay Board D0 = Without Digital Output Board A0 = Without Analog Board N4 = NEMA 4 Enclosure |
| 2110-V1-K0-D0-A0-N0 | Brake Parts | Ametek Gemco Shut Height Monitor Model 2110-V1-K0-D0-A0-N0 2 Channel Analog Output V1 = LDT Board Input K0 = Without Relay Board D0 = Without Digital Output Board A0 = Without Analog Board N0 = No Enclosure Supplied. NEMA 4 & 12 are available |
| 2110-V1-K0-D0-A0-N12 | Brake Parts | Ametek Gemco Shut Height Monitor Model 2110-V1-K0-D0-A0-N12 2 Channel Analog Output V1 = LDT Board Input K0 = Without Relay Board D0 = Without Digital Output Board A0 = Without Analog Board N12 = NEMA 12 Rated Enclosure |
Fenton, MO 63026
Phone: (636) 537-0202
E:mail: [email protected]